Paintball

[alpha434]

Try kneeling. The ergonomics go crazy good in a kneel.

[heinous]

Originally Posted by alpha434

Try kneeling. The ergonomics go crazy good in a kneel.

that's what she said

[Bigtuana]

I just found this thread. I'm glad my extensive photo taking inspired and assisted you. It looks great!

How have the FS rounds been feeding?

[russc]

I've got a "naked retro" top tubeless setup as well as a bolt action nelson with a stock, and I agree that a stock makes things much more ergonomic and it is a cinch to stay on target.

The main advantage of going stockless is the maneuverability when you are in tight.

[D3adpool]

There is a slight learning curve. Paintballs are no problem. Cock, drop in paintball, shoot, repeat. I can probably manage about a paintball every 3 to 5 seconds if I grab a bunch in my hand and just fire them off.

With FS, the breech is a little big for the round. So when you cock the bolt/hammer you have to close the gap a bit by bringing the bolt/hammer forward before dropping in the FSR, then shoot. It takes some getting used to but its totally doable. I can probably feed FSR 1 every 10 secs on average. I think I can improve upon that time a bit though with enough practice.

The easier way is to lower the marker at an angle and drop the FSR in and for the most part it will drop in place but of course you take the marker off the target in doing it this way.

Originally Posted by Bigtuana

I just found this thread. I'm glad my extensive photo taking inspired and assisted you. It looks great!

How have the FS rounds been feeding?

@ Bigtuana... yeah man it sparked my creative thinking. Also, Josh's awesome looking custom phantom that is floating around gave me some ideas as well. Originally (according to my first drawings), the grip rail as it is now was also going to be a shroud that extended beyond the breech and also affixed at the top of the marker (screw just before the breech) and under by the quick strip screw area. But that original idea was a bit problematic as I need to assist the FSR into the breech. If it was just ordinary paintballs then this concept would have looked much different.

[Kanas]

what stock is that and where can i get it? how was installed? great job, love how is a small marker that packs a BIG punch!

[D3adpool]

I got this stock off of evike 3-4 years ago. It's for an air soft raffica m93 pistol. I just goggled it and this is what popped up

P Force Full Metal Folding Shoulder Stock for M93R by: P Force -

I know on evike it was discontinued at one point in time.

Alpha modded the grip of the R7 to accommodate the stock.

[Kanas]

thanks, is it metal? would the modification for it to be on a nelspot 007 be difficult you thnk?

[D3adpool]

It's metal alright. What kind / type I can't say for certain.

I have never held nor seen in person a nelspot 007. Sorry cant help you there. But I would assume that it would need some sort of modding to get the stock to fit properly on anything else other than the airsoft M93. The very least you would have to drill / bore the grip frame out a bit.

[Kanas]

thanks, i see you are in nyc, where do you usually play- use fs rounds?