|Brass Eagle Brass Eagle owners can hang out here|
| ||Thread Tools||Search this Thread|
|08-09-2010, 05:46 PM||#5 (permalink)|
Join Date: Jul 2006
Location: Pittsburgh, PA
I use a Blazer barrel in mine. A wrap of duct tape on the barrel, screw it in, and the threads in the body bite into the tape. The shank part of the Blazer barrel is the same size as the shank on the Tiger Shark barrel. I used to run a 12" dual vented brass barrel in mine. Additionally, wedgits = no roll outs. Double win.
|08-09-2010, 06:08 PM||#6 (permalink)|
No! Not spyder thread!
Stop repeating that!
Top barrel is Raptor.
Middle barrel is Tigershark. Notice the same size and thread pitch, just the Raptor barrel has a longer breach section. A little careful trimming and you're set.
The bottom barrel is Spyder threaded. Too short of breach section and smaller, finer threads. Even if forced in the barrel wouldn't fully seat into the breach of the gun.
Nunquam emere quid potes facere
|08-09-2010, 06:21 PM||#7 (permalink)|
Join Date: Apr 2006
Location: Kansas for now
Didn't we just have this conversation?
I just bought two Raptor barrels for my TS, one is brass!
When the last Raptor is laid to rest, the Honor guard will be carrying Tigersharks....
MCB Feedback: http://www.mcarterbrown.com/forums/f...tml#post975264
|08-09-2010, 08:37 PM||#8 (permalink)|
Join Date: Jul 2010
Location: South Dartmouth, MA
Doesn't matter what you shoot, so long as you do.
Proto Matrix Rail
Tippmann 98 Custom
Brass Eagle Raptor x2
Delta 68/PT Xtreme pistols
|11-20-2010, 12:30 PM||#9 (permalink)|
Join Date: Nov 2010
Location: Canada's Capital Region
Ugh, the ONLY gun that ever used the same barrel threading as a Tigershark, were those cheap black composite body ZAP blow-backs Walmart sold for a number of years. The ones with the rear cocking bolt and the silver barrel.
|Thread Tools||Search this Thread|