|Brass Eagle Brass Eagle owners can hang out here|
| ||Thread Tools||Search this Thread|
|12-16-2012, 12:49 AM||#1 (permalink)|
Join Date: Apr 2006
Location: Atlanta, GA
I was looking about the JT replacement parts list for the T-shark, and came up with a semi-handy cross reference.
Hot-Rodding Your Tigerhark
BE Tigershark article from Stock-Class Paintball Network
If you can find them, the Quick-pull pins and Bottom Line adapter work for the Tigershark as well.
Last edited by ironnerd88; 12-16-2012 at 12:01 PM. Reason: revised spreadsheet
|07-07-2014, 05:25 PM||#4 (permalink)|
Join Date: Jan 2013
tiger shark springs
I found a spring inside a broken tire gauge (originally purchased at Harbor Freight) that was the same diameter as the tiger shark mainspring. I cut it a coil longer than the original and it worked fine. I haven't had it chrono'd yet, but pretty sure it's not firing too hard. At the same time I took a page out of the oldskool Nelson mods and cut a half coil off the valve spring, in theory, lightens it to let in more co2 during cocking. The item number for the tire gauge is 68272 made by central pneumatics. The spring is long enough to get 2 new mainsprings out of, with room to spare. Have fun and experiment with your tiger shark, its a tough gun with simple Nelson internals. They can be picked up cheap at yard sales and flea markets. I think some of the talon internals will fit.
|Thread Tools||Search this Thread|