|
             |
 |
|
| Brass Eagle Brass Eagle owners can hang out here |
 |
| | LinkBack | Thread Tools | Search this Thread |
12-20-2007, 07:12 PM
| #1 (permalink) |
| Newbie Join Date: Dec 2007
Posts: 2
| RM regulator cap I pulled my old Rainmaker out of retirement and gutted the reg. I went to Lowe's to look for a cap to replace the stock cap (with the hole in it) but couldn't find one that fit. I've seen them on other Rainmakers and was wondering if anyone knew the thread pattern and size, and/or where I could get one. Thanks. Stik |
|  |
|
12-21-2007, 08:29 AM
| #2 (permalink) |
| No stoppin' the D-Train  Join Date: Jan 2007 Location: Central WI
Posts: 276
| Cap? Do you mean the end cap that comes off the backblock? If so, I don't *think* you'd be able to find something like that anywhere... Plus the back cap is what helps provide the extra valve volume for gas expansion. I believe the instructions on the RMOG site suggest tapping the already-present hole and fitting an allen screw into it to seal it off. RMOG's reg-gutting instructions.
__________________ -Derrick- Central Wisconsin Paintball, Shawack Paintball LLC, Badger Brigades Feedback: MCB, PbNation (older) (newer) |
|
| |
|
12-21-2007, 01:56 PM
| #3 (permalink) |
| Newbie Join Date: Dec 2007
Posts: 2
| Yeah, that's it. I've seen several people with caps in place of the original. There's even a RM on the picture thread with one. I'm not too concerned about the loss of volume with a different cap, and I'd prefer to shorten the gun up a little bit. |
|
| |
|
01-16-2008, 09:27 PM
| #4 (permalink) | |
| Seasoned Member  Join Date: Jan 2008 Location: Close to Gotham!
Posts: 550
   | Quote:
__________________ " Badges? We don't need no stink'n badges! " Blazing Saddles! Feedback  Lasoya Promaster FS Hoppers and a Tank FS Cheap 0men FS/T Misc. Sale Last edited by forstgump; 01-16-2008 at 09:36 PM. | |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
