|Brass Eagle Brass Eagle owners can hang out here|
| ||Thread Tools||Search this Thread|
|07-29-2008, 01:33 PM||#1 (permalink)|
Join Date: May 2006
Need a Nylon ball detent for Stingray
I'm looking for a nylon ball that is the same diamter as the steel ball bearing detent in the Stingray (1 & 2). There was a link to a guy that a stingray owner could contact to get a nylon ball bearing on Warpig Technical pages years ago, but it's not there now.
Does anyone have a source on where to find these nylon ball bearings? These were used to replace the steel ball bearing that would ding up the bolt.
|07-29-2008, 08:43 PM||#2 (permalink)|
Paintball Guns, Paintball Equipment & Paintball Accessories by Paintballtogo.com has acrylic ones.
I've also had luck with some cheap plastic beads from a craft store. 9mm or 10mm, or if they have them 3/8 inch (which is 9.525mm). Usually I'd get the cheap fake pearls, and scrape the paint off.
If you want to be really spiffy though, search around on smallparts.com
How about a pack of 25 3/8" delrin balls for $2.25!
Smallparts.com: Acetal Delrin Polished Ball Grade 1, 3/8" Diameter
000110 200 11202 10 000020
012211 021 22110 22 121101
222001 222 10220 00 022212
|Thread Tools||Search this Thread|