|Carter Machine Carter Buzzards, Comps, Mini Comps, Ducks and more!|
| ||Thread Tools||Search this Thread|
|09-07-2012, 02:32 PM||#1 (permalink)|
CIP Boxgun internals
Anyone know if Lapco grey ghost internals would fit in a CIP Boxgun without modification?
I've found a couple CIP Boxgun sales thread mentioning they got Lapco internals in them but I just want to confirm that they are drop in replacements.
- Taso rat attack bucket changer with original steel pierce pin!
- duckslide 1 piece feed
|09-07-2012, 03:25 PM||#2 (permalink)|
Sorry, that's classified.
Join Date: Sep 2011
Location: SoCal, USA
Don't quote me on this, but I'm pretty sure it could work with some modification. The hammer sear is different and could affect the way it's tripped. Powertube assemblies should be standard (it is a Nelson after all). Could either mod the lapco sear a bit shorter to hit the trip correctly, or punch out that one and replace with a phantom sear.
As far as Powertube, some have better luck with the threading on the lapco#6 / other lapco tubes' threading pattern. Others have rotten luck and the strip the cup seals. I've got a #6 turned down to phantom spec but haven't tried it yet.
Bolt would need to be drilled to accept the pump screws too, not sure if they're threaded the same. Again just trying to base off what I know about each item being stock.
My Feedbacks • My youtube channel • Boxgun vs Duckslide showdown • My cooking sessions; Calzone, California Club Pizza Project notes: KP disassembly and valve repair notes
For sale!--->Polished clear and pink Luxe 2.0, TiPX (to be posted...), Works project (to be posted...)
Last edited by Donut SD; 09-07-2012 at 03:26 PM. Reason: Added more
|Thread Tools||Search this Thread|