-   Carter Machine (
-   -   Stock Class Carter Sniper (

Penarol10 11-02-2012 12:37 AM

Stock Class Carter Sniper
You read the title right. I'm looking to get as much info on this marker as I can. Serial number on the body is in the 91000s. I know of at least one other sniper just like this. I have no idea how many of these were made. As far as i can tell it has a LP valve in it, I get a lot of shoot up when I run 12 grams vertically. I think getting a palmers HP valve and playing with the springs should fix that though. It does have some cosmetic wear but its in pretty good shape, 8/10.

Let me know what you think, any info would be appreciated.

shoot to thrill 11-02-2012 12:59 AM

Wow! I am a fan of that, haven't seen that one before.

worrptangl 11-02-2012 02:50 AM

That is one of the snipers Earon made while he was with DYE IIRC. I have see a few but not many.

Great looking sniper! Earon does awesome work on them.

thumper 11-02-2012 07:50 AM

pure hottness

BigOldSkool 11-02-2012 08:02 AM

Wow, that's a pretty.

Penarol10 11-02-2012 04:03 PM

Any idea how much its worth anyone? Like i said, dont know much about this gun. I just know that I traded a Karnivor for this back in 2007. The guy I got it from was running it with a reg and CA. It really doesnt work at all with 12 grams right now.

Shane-O 11-02-2012 04:27 PM

That gun and another similar one in dark green were made at the same time for the 2 guys who owned G-Force paintball shop in Fairview Heights Illinois. They requested that he valve them for 12 grams and Earon didnt do it. They where built off supplied bodies by them. The other bad thing about them was Earon epoxied the feeds on which we thought was a un-Carter type thing to do. Anyway they both cost over $700 back in early 2000's brand new. Today, its hard to tell as it is a unique gun.

Shane-O 11-02-2012 04:31 PM

Sorry, forgot to add, that Mark did try different valves and springs and didnt have much luck getting decent performance out of a 12 gram. I would maybe look at regging the 12gram as others have done and had some success with.

Penarol10 11-02-2012 06:13 PM

Thanks for the info Shane-O!

I can confirm the Epoxied feed tube, I had to re-epoxy it myself since it came off at one point. I am bound and determined to make this thing run on 12 grams. My course of action is going to be to get a Palmers HP LT valve or maybe a sniper I valve from baccipaintball and a spring kit.

FYI I also know of one other one just like this in this same color. Last I knew of it it belonged to Billy6977 if you know him.

Elemental 11-08-2012 01:02 AM

Is that Billy's old gun?

Also, how's it going Chris?

All times are GMT -4. The time now is 10:20 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC