mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Carter Machine (http://www.mcarterbrown.com/forums/carter-machine/)
-   -   Carter Buzzard Velocity problem (http://www.mcarterbrown.com/forums/carter-machine/229801-carter-buzzard-velocity-problem.html)

Mozak 03-26-2013 10:56 AM

Carter Buzzard Velocity problem
 
Alright so I have my velocity turned all the way out but my velociity is still at about 350 fps, I have tried trimming the valve spring but it did not do anything, help?

llaw999 03-26-2013 01:07 PM

Get a spring kit and use a stronger valve spring or a lighter hammer spring. Not sure how you're going to lower it without new springs.

williamk 03-31-2013 07:18 PM

Trimming the valve spring is the opposite of what you want to do. If you have to clip, clip the main spring. But best bet would be to buy a spring kit which should have a variety of main and valve springs. Go lighter on the main spring first, then go for a beefier valve spring.


All times are GMT -4. The time now is 07:18 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC