mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Carter Machine (http://www.mcarterbrown.com/forums/carter-machine/)
-   -   Phantom Feedgates compatible with Buzzard Feedgates? (http://www.mcarterbrown.com/forums/carter-machine/248402-phantom-feedgates-compatible-buzzard-feedgates.html)

Mozak 12-30-2013 12:41 AM

Phantom Feedgates compatible with Buzzard Feedgates?
 
one of my "fins" broke off on my rubber feedgate and its pretty worn down anyways and before I tear it out id like to know if it is even compatible with a phantom rubber feedgate, I contacted lauren about getting about getting one and she replied asking for my address but that was maybe over 2 months ago and I don't want this thing to wear out to where it falls out mid game, let me know thanks!

1shot 12-30-2013 05:48 PM

It's a Phantom fees gate, or at least mine is. Just pulled them out to compare.

Mozak 12-30-2013 08:06 PM

Alright, cool thanks mines like really corroded in there since its a pre dye, ill take it out and replace it

worrptangl 12-30-2013 09:00 PM

Yep they are the same. Paintball gateway sells different colors I believe also.

1shot 12-30-2013 10:17 PM

I have had trouble with the colored ones on my Phantom. They are to thick, very tight fit, and the balls won't roll out the 10 round tube. But that was on the Phantom, they may be fine on the Carter.

worrptangl 12-30-2013 11:23 PM

CCI Phantom Pump Gun Feed Necks & Tubes

They are at the bottom and advertised as CCI phantom ball retainer so who knows.

Mozak 12-30-2013 11:31 PM

I just popped mine out and put in a phantom one and fits flawlessly, good thing to know

hellion360 01-02-2014 10:01 PM

those colored ones are sock locks that have been repurposed I think.
Sock Locks, Sock Holders, Sock Sorters, Sock Clips, Sock Rings, Sock Organizers

worrptangl 01-02-2014 11:44 PM

That's what I was thinking. And a lot of those don't fit properly maybe an email to PBGateway is in order to find out.

Stitch 01-03-2014 07:42 PM

there are assorted sizes for sock locks - or sockies - sock holders - etc - thats why I typically just call Mike over at CCI and order his - they are always right on for what I need in paintball =)


All times are GMT -4. The time now is 06:00 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC