|CCI Home of the Phantom Pump Gun|
| ||Thread Tools||Search this Thread|
|12-22-2009, 05:49 AM||#1 (permalink)|
Join Date: May 2009
JCS folding stock
Im going to hopefully order a JCS folding stock from their website soon:
JCS Paintball Products
Im just wondering it is the - Classic combat folding stock i get right ?
and also I hate the angle that my t stock came off the phantom
Will the JCS Upper Stock Angle Block Kit help me to change this ?
Or do i Need to get the part from Mike that changes the angle ?
And also how do you like your JCS stock if you hae used one ?
|12-22-2009, 06:32 AM||#2 (permalink)|
Back to paintball.
A few things:
1) The JCS combat stock only mounts to the bottomline.
2) The upper angle will not change that. It's only for stocks that are stuck to the back of the guns like tippmanns, where they use a replacement.
Notice in that picture where the stock angles? That's where the angle blocks are. The bottomline mounted one just mounts like an ASA.
As for using one, it's a well made stock, but it's certainly not for everyone. I find that the stock sits too low and that it isn't angled makes it suitable only for semi autos. It works good when mounted on the back of a gun like a tippy though, very comfortable, but the bottomline configurations just feel terrible. It's only adjustable with a drop forward, so you're looking to spend at least $60 + shipping to make it fit properly.
One solution is to get the CCI 5 degree block from Mike. It'll elevate the gun and put whatever is on the bottom at an angle.
Last edited by Ir0nExpress; 12-22-2009 at 06:42 AM.
|12-22-2009, 08:04 AM||#4 (permalink)|
Shi Tamagutsu Ka
Join Date: Apr 2006
Location: the group W bench
Been using a JCS Voodoo folding stock for years on my Phantom.
I also did not like the angle but my solution was to turn it upside-down.
CT co-ordinator, Paintball Marshals
PTI #2691 ~ C1, C2, C5, C5a, C6
|12-22-2009, 11:42 AM||#5 (permalink)|
Join Date: Oct 2006
Location: London, On.
Can I mount a bottom line with the JCS combat stock? ie. can I have both the stock and ASA on the bottom of my grip frame?
|12-22-2009, 03:59 PM||#6 (permalink)|
Back to paintball.
-longer bottomline screws
-You'll need a small drop forward to make it fit properly otherwise you wont have space to screw in your tank.
|12-24-2009, 08:56 PM||#8 (permalink)|
Join Date: Dec 2006
I've got several of the JCS folding "T" stocks & love them. Universal & light.
Unconscious Incompetent: You don't have enough knowledge to even realize you can't perform a given task.
Conscious Incompetent: You gain just enough knowledge and skill to realize that you suck at a given task.
Conscious Competent: You gain skill through practice and eventually can do a fair job at a given task with a lot of conscious effort and thought.
Unconscious Competent: Eventually, after enough practice, the given task will become second nature and it will no longer feel "uncomfortable".
|Thread Tools||Search this Thread|