mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCI (http://www.mcarterbrown.com/forums/cci/)
-   -   VSC to bottom-line air adaptor? (http://www.mcarterbrown.com/forums/cci/120870-vsc-bottom-line-air-adaptor.html)

Redherring 05-22-2010 10:35 PM

VSC to bottom-line air adaptor?
 
Hey guys, I just got back from my first game, and I've decided that I should be starting in open class rather than stock. I have a VSC configured phantom with a 45 grip frame, so I need to adapt the vertical air feed to bottom of the frame. Is the part I need available to order directly from CCI(as I will need to order a right-feed breech anyway)?

flyinggobbo 05-22-2010 10:44 PM

you could use an air-through grip on the Vert air.

Jinx 05-22-2010 10:44 PM

You do not need to order a right feed body, some spyder feednecks fit the phantom. I don't know which ones. But you will need the bottom line adapter. that would probably be the cheapest way to do it. Also you can get a clamping feedneck.

B_i_s_c_u_i_t 05-22-2010 10:47 PM

You can't use the VSA on the 45 frame. Won't fit and holes don't line up etc..
CCI does make, and you can order it direct, a bottomline for the 45 frame.
I would recommend getting the 5 Degree ASA Mounting Block and using a rail mount type on/off ASA.
Any Spyder with holes feed neck adapter will fit a SC body.

Stripes 05-22-2010 11:21 PM

you need an ASA to 1/8 NPT adapter, mike sells them
then just use a standard ASA

there are also adapters for the feedneck, I don't remember who sells them, though

Redherring 05-22-2010 11:45 PM

Alright, I'm afraid I'm quite new at this so all these acronyms are lost on me. I'm pretty much looking to do something like this guy:

http://i112.photobucket.com/albums/n...x/100_2708.jpg

Also, as for the spyder feedneck, is this what I'm looking for?

Amazon.com: Clamping Feedneck for Spyder - With Holes: Sports & Outdoors

Sedition 05-23-2010 01:39 AM

Quote:

Originally Posted by Redherring (Post 1318291)
Alright, I'm afraid I'm quite new at this so all these acronyms are lost on me. I'm pretty much looking to do something like this guy:

Also, as for the spyder feedneck, is this what I'm looking for?

Amazon.com: Clamping Feedneck for Spyder - With Holes: Sports & Outdoors

I think this might help:

http://www.seditionpb.com/images/Phantom%20Sketch.png

I personally have only used CCI gravity feed breeches, either with an elbow or just a press fit hopper (as seen on my avatar)

The easiest way to do it if you are in the US is probably just to call CCI, you'll probably end up talking to Mike, who designed the Phantom, and he will get you exactly what you need. How cool is that?

If you happen to be in Canada, feel free to PM me, I have all the parts you would need. I am not as cool as Mike though... ...but who is?

Redherring 05-23-2010 11:55 AM

Ahh ok thank you, that did help. I think I will give Mike a call, that'd probably be the fastest way to get what I need.

Redherring 05-23-2010 12:53 PM

EDIT: Making thread

Redherring 05-25-2010 11:01 AM

Ok, so presuming I order the bottom-line from Mike, will I be good if I order the following?

http://www.doropaintball.com/AB10381...xd.asp?id=8500
http://www.doropaintball.com/AB10381...xd.asp?id=8514
http://www.doropaintball.com/AB10381...d.asp?id=12457

The above being a 1-8 adapter, 6 inches of stainless steel hose, and 90 degree swivel adapter(is this what I need to connect the hose to the bottom line?). Does will the length of hose screw right into both the adapters, and is 6 inches the right length to go from the vertical ASA to the bottom line?


Alternatively, I could just order a bottom line kit that would end up being cheaper since I wouldn't order a bottom line from Mike, which is $18. Does the adapter in this kit (http://www.doropaintball.com/AB10381...xd.asp?id=8385 work with a phantom .45 grip?


All times are GMT -4. The time now is 04:50 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC