mcarterbrown.com  

CCI Home of the Phantom Pump Gun

Reply
 
Thread Tools Search this Thread
Old 05-15-2012, 06:16 PM   #31 (permalink)
Seasoned Member
 
suaze's Avatar
 
Join Date: Mar 2008
Location: BC, Canada

CCM Fan
Quote:
Originally Posted by O'Lane View Post
More progress, and on a side note, the drilling of phantom bolts should be illegal, what a pain to do.
Main reason I picked a Trracer to play with. Bolts are tapped.
Loving the work so far.
__________________
Feedback here
suaze is offline   Reply With Quote
Old 05-18-2012, 08:15 PM   #32 (permalink)
The Millrat
 
O'Lane's Avatar
 
Join Date: Feb 2007

Alrighty, time for an update. After trying to do a connection to the bolt using a clevis I decided it would be junk that way, not enough strength and it just wouldn't look right. So after some thought, here's my solution... It's actually a pretty complex little piece that involved making a new cam and machining a delrin housing to house the shoulder bolt that connects the delrin to phantom bolt, the delrin also houses a 3/16" pin with a freely rotating 1/4" collar that rides inside the slot machined into the new cam. The 1/16" hole you see is just an access hole to knock out the 3/16" pin when disassembling the mechanism. The result is a buttery smooth action that is awesome. (Teimusan, you might not get this phantom back, haha). The delrin is also long enough to completely cover the machined slot in the phantom body, keeping the breech free and clear of dirt, debris, etc... Now it's time to figure out the connection from the cam to the lever and the action will be complete.. Here's some current photos, I'll get some more detailed ones later.







O'Lane
__________________
Custom Parts Machining... Feel Free to Contact
"All that is necessary for evil to succeed is for good men to do nothing"
God Bless America
O'Lane is offline   Reply With Quote
Old 05-18-2012, 10:16 PM   #33 (permalink)
Boom. Yummy
 
dundadun's Avatar
 
Join Date: Jul 2007
Location: SoCal

Brass N Wood Fan
Kilt Fan
Since you are working with delrin, maybe you can do what Smiley was going to do for my barrel before we figured out the for-arm wood on my dsg.

Take a square rod piece, cut the top two edges down with a diagonal cut, mate the bottom of the delrin rod to the wood and bore it for the desired barrel OD. This will give you the look of the octagon barrels of old.
dundadun is offline   Reply With Quote
Old 05-18-2012, 10:19 PM   #34 (permalink)
The Millrat
 
O'Lane's Avatar
 
Join Date: Feb 2007

Well, I got so close to testing it and then the weld from the cam to the rod broke, no big deal, it'll get rewelded tomorrow and be good as new. Anyways, it's pretty much complete as far as the action goes, still need to fit a 20 round spring feed to it and clean everything up. Here's some photos to see the complete look.







Dan
__________________
Custom Parts Machining... Feel Free to Contact
"All that is necessary for evil to succeed is for good men to do nothing"
God Bless America

Last edited by O'Lane; 05-18-2012 at 10:27 PM.
O'Lane is offline   Reply With Quote
Old 05-18-2012, 10:29 PM   #35 (permalink)
The Millrat
 
O'Lane's Avatar
 
Join Date: Feb 2007

Quote:
Originally Posted by dundadun View Post
Since you are working with delrin, maybe you can do what Smiley was going to do for my barrel before we figured out the for-arm wood on my dsg.

Take a square rod piece, cut the top two edges down with a diagonal cut, mate the bottom of the delrin rod to the wood and bore it for the desired barrel OD. This will give you the look of the octagon barrels of old.
Not a bad idea dundadun, I'll have to keep that in mind.
__________________
Custom Parts Machining... Feel Free to Contact
"All that is necessary for evil to succeed is for good men to do nothing"
God Bless America
O'Lane is offline   Reply With Quote
Old 05-18-2012, 10:32 PM   #36 (permalink)
Boom. Yummy
 
dundadun's Avatar
 
Join Date: Jul 2007
Location: SoCal

Brass N Wood Fan
Kilt Fan
Credit all goes to Smiley. I wish I could have gotten it to work on my gun.
dundadun is offline   Reply With Quote
Old 05-18-2012, 11:10 PM   #37 (permalink)
MCB Member
 
Join Date: Apr 2006

Looks great. I still need to find a longer freak tip for this rifle. Keep it up Dan.
Teimusan is offline   Reply With Quote
Old 05-19-2012, 01:18 AM   #38 (permalink)
Rec Poster
 
Join Date: Apr 2012
Location: Canada

This is a work of art. I wish I had the skills take one of these myself. Or at least the funds to.pay for one
Gambit88 is offline   Reply With Quote
Old 05-19-2012, 10:31 AM   #39 (permalink)
ur my sister
 
joedirt199's Avatar
 
Join Date: Apr 2009
Location: St Louis

is it going to have a brass cover plate on the side to make it look like the old henry rifle actions?
__________________
God created Police so Firemen would have HEROES
In God we trust, everyone else gets searched
9mm will make you weak!

MY FEEDBACK
http://www.mcarterbrown.com/forums/f...-feedback.html

CCM Works Sniper, Thumper, Kingman Hammer Low Pressure with Vertical ASA, TPX, Ion mech/closed bolt
joedirt199 is offline   Reply With Quote
Old 05-19-2012, 10:34 AM   #40 (permalink)
ur my sister
 
joedirt199's Avatar
 
Join Date: Apr 2009
Location: St Louis

if you were not going to use the nylon set screw in the bolt then you could have just rotated the bolt and used that hole as your bolt connection. it is the same threading as a trracer/hammer side cocking bolt.

Quote:
Originally Posted by O'Lane View Post
More progress, and on a side note, the drilling of phantom bolts should be illegal, what a pain to do.

http://i1141.photobucket.com/albums/...2/DSC01385.jpg
__________________
God created Police so Firemen would have HEROES
In God we trust, everyone else gets searched
9mm will make you weak!

MY FEEDBACK
http://www.mcarterbrown.com/forums/f...-feedback.html

CCM Works Sniper, Thumper, Kingman Hammer Low Pressure with Vertical ASA, TPX, Ion mech/closed bolt
joedirt199 is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCI

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 03:49 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC