mcarterbrown.com  

CCI Home of the Phantom Pump Gun

Reply
 
Thread Tools Search this Thread
Old 05-12-2012, 02:59 PM   #1 (permalink)
The Millrat
 
O'Lane's Avatar
 
Join Date: Feb 2007

Wild West Phantom

This a build in progress that I'm doing for a member here and I think many of you will really enjoy it. I'll be sure to update this thread as progress continues.

This is going to be a lever action phantom and there's quite a bit of work left to do until it gets there, but the outside shaping of the stock is just about finished, once I complete the inletting and such, I'll do a finish sanding on the stock to remove the small scratches caused by the heavier sanding paper. I'll also finish the shaping around the trigger and a few other areas once I get the trigger in and can see the final look of it. So far it's coming along very well, especially for the first stock I've ever created from a true blank.

What it was...



Where it currently is...







Yippee Ki Yay!!!
__________________
Custom Parts Machining... Feel Free to Contact
"All that is necessary for evil to succeed is for good men to do nothing"
God Bless America

Last edited by O'Lane; 05-12-2012 at 03:07 PM.
O'Lane is offline   Reply With Quote
Old 05-12-2012, 03:49 PM   #2 (permalink)
Rec Poster
 
The Reaper's Avatar
 
Join Date: Nov 2010
Location: Near Hamilton, Ont.

Well,I'm in lust.

Now...lets see if I can return your Pm ,without my computer crashing again.
Been acting up for a month.
__________________
Feedback
The Reaper is offline   Reply With Quote
Old 05-12-2012, 05:24 PM   #3 (permalink)
depot damager
 
anomoly40's Avatar
 
Join Date: Dec 2007
Location: Central Arkansas

Yaaaw!

Im seeing a leather scabbard being made for this.
anomoly40 is offline   Reply With Quote
Old 05-12-2012, 05:40 PM   #4 (permalink)
Boom. Yummy
 
dundadun's Avatar
 
Join Date: Jul 2007
Location: SoCal

Brass N Wood Fan
Kilt Fan
Looks awesome!

Is that a modified henry lever or did you make that lever loop yourself?
dundadun is online now   Reply With Quote
Old 05-12-2012, 07:46 PM   #5 (permalink)
Active Member
 
Bull Dog's Avatar
 
Join Date: Mar 2008
Location: Nova Scotia. Canada

CCM Fan
Brass N Wood Fan
when you figure out how to make the lever work I would love to know, been wanting to do one for a long time.
Bull Dog is offline   Reply With Quote
Old 05-13-2012, 03:11 AM   #6 (permalink)
Active Member
 
esparzar's Avatar
 
Join Date: Mar 2008
Location: Clarksville, Tn
Send a message via AIM to esparzar Send a message via MSN to esparzar Send a message via Yahoo to esparzar

Quote:
Originally Posted by Bull Dog View Post
when you figure out how to make the lever work I would love to know, been wanting to do one for a long time.
I'd copy CCM's idea with the Cam arm. Will probably need to fab a piece to screw on the end of the cocking rod that has a slot that a pin, attached to the lever, can freely maneuver but still allow it to cock the phantom. Easiest option that I can think of, after all everything is KISS.

GL with the build. Depending on how it goes I maybe interested in one as well. Especially if you make octagonal breaches and barrels to complete the effect.
__________________
My Feedback
My SCP Feedback +8/0/0
My MCB Feedback +18/0/0

Last edited by esparzar; 05-13-2012 at 03:16 AM.
esparzar is offline   Reply With Quote
Old 05-13-2012, 01:07 PM   #7 (permalink)
The Millrat
 
O'Lane's Avatar
 
Join Date: Feb 2007

Yep, the method we planned on was an external cocking lever similar visually to the CCM cam arm, except the arm will probably be tacked onto the end of the pin with a welder rather than screwed on.

I'm going to see how this build goes before I start offering this as a service.

Quote:
Originally Posted by esparzar View Post
I'd copy CCM's idea with the Cam arm. Will probably need to fab a piece to screw on the end of the cocking rod that has a slot that a pin, attached to the lever, can freely maneuver but still allow it to cock the phantom. Easiest option that I can think of, after all everything is KISS.

GL with the build. Depending on how it goes I maybe interested in one as well. Especially if you make octagonal breaches and barrels to complete the effect.
__________________
Custom Parts Machining... Feel Free to Contact
"All that is necessary for evil to succeed is for good men to do nothing"
God Bless America
O'Lane is offline   Reply With Quote
Old 05-13-2012, 02:36 PM   #8 (permalink)
Stock class SPAM
 
808Jackal's Avatar
 
Join Date: Apr 2010
Location: Honolulu, HI

I was going to ask if you could do this to my rifle phantom but now I'm sure I will. Dammit another project idea....
808Jackal is offline   Reply With Quote
Old 05-13-2012, 02:39 PM   #9 (permalink)
Active Member
 
Bull Dog's Avatar
 
Join Date: Mar 2008
Location: Nova Scotia. Canada

CCM Fan
Brass N Wood Fan
I will be watching this one closely.
Bull Dog is offline   Reply With Quote
Old 05-13-2012, 02:48 PM   #10 (permalink)
Newbie
 
Join Date: Apr 2011

Where did you purchase the lever?
crondaily is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCI

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 08:02 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC