mcarterbrown.com
 

CCI Home of the Phantom Pump Gun

Reply
 
Thread Tools Search this Thread
Old 09-12-2012, 07:56 AM   #21 (permalink)
Active Member
 
Join Date: May 2009

Have you tried it with air yet? Use an allen key to turn the compensator until its putting the least amount of pressure on the main spring and see if it works on air before ringing anyone. Apologies if I missed a post about it being tried on air.
Cannon Fodder is offline   Reply With Quote
Old 09-13-2012, 12:20 AM   #22 (permalink)
hth
Seasoned Member
 
Join Date: Dec 2011

But thing is the oring in the comphensator is shredded so should I get new orings before i air it up?
hth is offline   Reply With Quote
Old 09-13-2012, 03:05 AM   #23 (permalink)
MCB Member
 
Join Date: Aug 2011

Palmers Fan
I found that the orings on my tpc kept getting shredded as I had not backed out the nylon set screw so it was catching on it. If you have a oring on the tpc I think the set screw is not needed anymore so I would trying backing it out till it was flush with the bottom of the threads.
__________________



MCB Feedback

Last edited by Malafanango; 09-19-2012 at 03:15 AM.
Malafanango is offline   Reply With Quote
Old 09-13-2012, 09:02 AM   #24 (permalink)
The Man With No Plan
 
super_stanchy's Avatar
 
Join Date: Nov 2008
Location: Oregon City, OR

CCM Fan
PBN Fan
Quote:
Originally Posted by Malafanango View Post
I found that the orings on my tpc kept getting shredded as I had not backed out the nylon set screw so it was catching on it. If you have a oring on the tpc I think the set screw is not needed anymore so I would trying backing it out till it was flush with the outside of the tpc.
the oring isnt "needed" if you want to use only the nylon setscrew
the oring is needed if you want to replace it, it slips on, adjust your setscrew so its flush with the threads (so there isnt a hole anymore) and it shouldnt get torn up

without the setscrew to fill the thread void, its a bunch of sharp edges and they will eat rubber orings
super_stanchy is offline   Reply With Quote
Old 09-13-2012, 08:08 PM   #25 (permalink)
hth
Seasoned Member
 
Join Date: Dec 2011

So I'm set then if I tossed out the oring for now and replace it whenever I find out the size of oring needed for the tpc then?
hth is offline   Reply With Quote
Old 09-13-2012, 08:48 PM   #26 (permalink)
The Man With No Plan
 
super_stanchy's Avatar
 
Join Date: Nov 2008
Location: Oregon City, OR

CCM Fan
PBN Fan
Quote:
Originally Posted by hth View Post
So I'm set then if I tossed out the oring for now and replace it whenever I find out the size of oring needed for the tpc then?
yup

have you gassed her up to try it out?
super_stanchy is offline   Reply With Quote
Old 09-13-2012, 09:18 PM   #27 (permalink)
hth
Seasoned Member
 
Join Date: Dec 2011

Havent had time, but for sure will come sunday
hth is offline   Reply With Quote
Old 09-18-2012, 07:30 PM   #28 (permalink)
hth
Seasoned Member
 
Join Date: Dec 2011

Ok, the phantom shoots. However, it's inconsistent :/ I'm thinking it has to with the tpc and/or the way I pump the marker
hth is offline   Reply With Quote
Old 09-18-2012, 07:36 PM   #29 (permalink)
Predatory Bird Oculus
 
Hawkeye20's Avatar
 
Join Date: Apr 2011
Location: Behind You.

Brass N Wood Fan
Palmers Fan
Define inconsistent.
__________________

Hawkeye20 is offline   Reply With Quote
Old 09-18-2012, 08:05 PM   #30 (permalink)
Sidewinder Hoarder
 
toymachine's Avatar
 
Join Date: Dec 2010
Location: Fascist Valley

So there is no o-ring on your tpc and the setscrew is screwed in to engage the tcp's thread (like it would be with a normal tpc, as there is no o-ring on the tpc keeping it set in place)? If the setscrew isn't screwed in to engage the threads of the tpc, the tpc is moving around leading to inconsistency. just remember to follow stanchy's advice once you put an o-ring back on the tpc.

tpc w/ o-ring --> keep bottom of setscrew flush with bottom of threads inside bolt to prevent the o-ring from binding up in the setscrew's hole
tpc w/o o-ring --> screw in setscrew to engage and lock threads of the tpc to keep the tpc from falling out of adjustment

Last edited by toymachine; 09-18-2012 at 08:24 PM.
toymachine is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCI

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 12:06 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC