|CCI Home of the Phantom Pump Gun|
| ||Thread Tools||Search this Thread|
|09-11-2012, 10:39 AM||#1 (permalink)|
Join Date: Sep 2008
Location: Chattanooga, TN
Milling the stock class adapter for a *90 offset sight?
I run an Armson sight on the top of my Phantom, and it makes for a very tall gun.
Looking at the stock class adapter, isn't there enough meat on the sides of the adapter that another dovetail sight rail could be easily milled at a *90 angle to the top one?
Has anyone ever seen this done?
|09-11-2012, 11:06 AM||#2 (permalink)|
Sorry, that's classified.
Join Date: Sep 2011
Location: SoCal, USA
I've never seen that done, but I don't see why not. In fact if you end up doing it I'd love to know how you went about that. I shoot mostly right handed and that would make a neatly profiled line of sight. I've seen some angled risers for sights, but again they leave the profile a bit tall.
My Feedbacks • My youtube channel • Boxgun vs Duckslide showdown • My cooking sessions; Calzone, California Club Pizza Project notes: KP disassembly and valve repair notes
For sale!--->Polished clear and pink Luxe 2.0, TiPX (to be posted...), Works project (to be posted...)
|09-11-2012, 12:28 PM||#3 (permalink)|
Brass Mafia Wannabe
Have fun milling the acrylic. Unless you've done it plenty of times before, there's a fair chance you'll chip/crack it before you're done.
|Thread Tools||Search this Thread|