|CCI Home of the Phantom Pump Gun|
| ||Thread Tools||Search this Thread|
|12-02-2012, 12:29 AM||#1 (permalink)|
Stock Class Aficionado
Black Magic Cup Seals
So, I ended up buying a couple from Carter thinking they would get used at some point. What's the benefit, if any, in using them in a Phantom, and what is required to make them work?
|12-02-2012, 09:18 PM||#4 (permalink)|
Elven Pump SDM/DM
Join Date: Oct 2008
yup, they are unthreaded plastic, you create your own threads. Other than nostalgia, they create excellent seals, are extremely durable and the plastic can withstand the temperature extremes typically experienced by co2 powered systems. I just bought some too, so I don't know this from experience. This is just a repetition of the hype I have heard (back in the day).
"Certainly there is no hunting like the hunting of man and those who have hunted armed men long enough and liked it, never really care for anything else thereafter." Ernest Hemingway, "On the Blue Water," Esquire, April 1936
In the world I see - you are stalking elk through the damp canyon forests around the ruins of Rockefeller Center. You'll wear leather clothes that will last you the rest of your life. You'll climb the wrist-thick kudzu vines that wrap the Sears Tower. And when you look down, you'll see tiny figures pounding corn, laying strips of venison on the empty car pool lane of some abandoned superhighway.
Visit my Etsy store:
Last edited by Legolas; 12-02-2012 at 09:30 PM.
|12-02-2012, 10:33 PM||#5 (permalink)|
Join Date: Apr 2006
They are pretty indestructable. I got one for the spyder in 02 and put it in a zeus. 8 years, 1,000s of 12grams and 2 zeus' later it was still going strong. IMO, they bounce less and give an extra shot or so.
We play Pistol and we encourage the Few despite the discouragement of the Many.
|12-04-2012, 08:58 PM||#7 (permalink)|
What ever you screw into them taps them.
Feedback http://www.mcarterbrown.com/forums/f...-feedback.html Gargoyle FAQ http://isppa.semkhor.com/newswire.asp?ctid=1116
|12-07-2012, 04:43 PM||#9 (permalink)|
Doesn't work for Avratech
Join Date: Aug 2007
Location: Vancouver, BC
the inside diameter is no doubt suited to fit 6-32 and 8-32, which have a difference of .020"... 10-32 however is no doubt too much of a stretch, and will deform the hell out of the seal resulting in the face not being flat, so it may not seal... if you can even get it on there at all. for your reference:
common thread IDs:
as you can see, big jump up to 10-32... so if you're planning on using Wizbaas PT with one of these you will need to modify the cupseal for the larger thread... which may pose a problem considering the type of material they are made of.
|12-07-2012, 06:09 PM||#10 (permalink)|
Ya I thought that might be a problem. I have several old Delrin cup seals that I tried and they would work but I think I'll stick with the original cup seal. Not enough of a change/improvement to merit the risk of an in game failure.
|Thread Tools||Search this Thread|