So I am trying to put together my "dream" phantom, and was wondering what your alls inputs where...
-Maybe the stab valve, or simple BBA
-CCM or Jcurt Frame (are there other good ones?)
-Maybe a DW barrel, not sure on this one.
-Polished, maybe lapco internals?
Any thoughts? Am I missing anything?
I prefer the jcurt 90* frame. That's only personal preference. I would try each one out first though. The CCM is closer to the regular 45* to me at least.
bobbed valve or some would suggest the RTR valve
SSC fluted hammer. Kind of a waste to put Lapco internals when SSC's stuff is great! ASP also sells them and they are awesome!
I like the CCM *86 frame
1 Piece feeds are awesome too.
I love the 86 frame. I'm thinking of picking up another one just in case.
I will never use another barrel besides my DW, ever.
I know some people love Lapco internals..personally I hate them. I just think the stock CCI ones are better designed.
I'd go for a UC kit over a slide. Just easier for me.
My dream Phantom is all stainless steel. Yes its heavy. Yes its expensive. But it'd be awesome. And shiny.
mmm... stainless phantom. I would take solid brass too. lol. Completely negate the lightweight purpose of a phantom!
No matter how much you trick it out your phantom, at the end of the day it is still a phantom, still gonna shoot just as straight, and still going to get the same amount of shots from a 12 gram (unless you go overboard with internals you might get 10 more shots). i say keep it stock and put a nice shiny orange anno on it and be done with it <3
Hrm. Polished brass VSC in 45 with a 14" barrel, 2.5" carved wooden pump, drop out 12 gram changer, and some nice matching wood grips would pretty much do it for me.
Honestly, everything I'd do to one is purely cosmetic or ergonomics to fit my playstyle. The Phantom's a damn fine shooter straight out of the box.
First, replace the stock hardline with larger SS-braided hose and a SS quick disconnect. While the hardline on a VSC is streamlined, it's a PITA to take off and does not really allow the gas to expand from the 12-gram to the valve. Replacing the hardline makes the gun easier to work on, and allow the gas to expand slightly inside the hose. When CO2 has a chance to expand a little you're not firing off pure liquid, which can give you a few more shots per 12 gram. Adding a small gas-through foregrip (that acts as a mini expansion chamber where the bucket changer screws in) is another option to help maximize shots and add consistency.
As mentioned, upgrading internals is part of the equation. New springs, and a lightened hammer can help. Some suggest cutting the top off the TPC in order to get it back to it's original configuration (Late 80's/Early 90's style velocity adjuster), but I can't say how much this affects efficiency. No matter what anyone tells you, polishing the internals will NOT increase effeciency.
Another way to increase efficiency (and accuracy) is by adding a bore-control barrel. Flasc, Lapco and other brands offer sized barrels that will eliminate blow-by. Blow-by is what happens when CO2 blows by a pellet that's smaller than the inner diameter of the barrel. Basically, you need to increase your velocity to compensate for the blow by which can drastically reduce your gas efficiency.
The single best way to maximize you shot count is to add a stabilizer or regulator. Palmer's stabs are the industry standard, but also come with a hefty price tag. Some say that the cost doesn't justify the gains, but if you truly want the best performance, then expect to pay for it.
Below are a few of my Phantoms. Each is equipped with an AGD Micro CA II or ACI Power Stock lever changer (all have check valves), a PPS Phantom Stabilizer, a sized barrel (either Lapco or Flasc), red main spring, SS hose and SS quick disconnect. The Phantom on top is shown disassembled and missing its bottom line adapter. The top two Phantoms have a 20 round feed tube and old-style pumps (about an inch longer than the current CCI pump). The bottom Phantom has an RTR frame and pump handle, and 15 round feed tube (the tape on the Micro CA lever is just a repair ticket). I have tried using an RTR valve body in the past, but had quite a few problems with it. I also hate one-piece feeds as they are far more difficult to clean than a two piece.
Any of these guns will easily outperform a factory Phantom in both efficiency and accuracy. As configured, I get about 38/40 usable shots off of one 12 gram (using Leyland 12 grams, and either Nelson, Valken or RPS) in around 70°/75° temps @ approximately 287/292 FPS. I'd say that almost doubling the usable shot count of a 12 gram is rather significant. The key word here is "usable", meaning a shot that is able to eliminate (break on) an opponent at a "normal" range.
A factory Phantom is very accurate, but I've found that the bore control barrels do make a difference. They perform far better than any inserts, which still allow blow-by. The bottom line on accuracy is paint quality. A million performance mods won't help you if you have dimpled or out-of-round paint. When you do get good paint, then a nice barrel can really help. Since getting good paint is always a coin toss I don't get too hung up on the whole accuracy thing.
I guess you could say the above guns are my "Dream Phantoms" as they have all the performance mods to fit my style of play. The higher capacity feed, and high efficiency keep me in a duel longer before I need to replace gas and paint. I can change 12 grams in seconds, and I don't need to worry about small paint with a bore-control barrel. Any cosmetic mods like grips, or a custom ano can be cool, but a secondary consideration to performance.
I hope this info helps,
However the paint in my area sizes at .670 -.673 and im pretty sure there are no barrels available in those sizes. Also all the fields i play at have a velocity cap of 250 and i still manage to get 30+ useable shots of a 12ie with no huge modifications (such as a PPS)
Also i have a question for you Slim, whats your opinion on Flasc and lapco barrels? how do you feel about them? and which do you think is better?
|All times are GMT -4. The time now is 11:35 PM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC