mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCI (http://www.mcarterbrown.com/forums/cci/)
-   -   Barrel used with Roundheads (http://www.mcarterbrown.com/forums/cci/228690-barrel-used-roundheads.html)

Bigtuana 03-13-2013 03:46 AM

Barrel used with Roundheads
 
What barrels do you folks prefer to use on your cocker threaded Roundheads? With UC kit or stock handle?

Saint_TGM 03-13-2013 08:02 AM

As far as I can tell, any cocker barrel works, so long as you're using an undercocking kit. I bought my Phantom with the UC kit, so I haven't been able to check if the standard pump handle works over a cocker barrel, but I'd think not... I use a Deadly Wind Fibur to great effect, but have tried a variety of barrels I own, to include a big old POS that came with an old sniper I bought years ago. It works fine, too.

Bigtuana 03-13-2013 12:54 PM

I'm mainly just looking for preference of which AC barrel y'all prefer.

Is deadlywind the most popular among roundhead users?

artguy63 03-13-2013 02:10 PM

I will never use anything but a DW again.

My one buddy uses an old bull barrel that he had bored for Freaks.

CxT 03-13-2013 05:06 PM

Forgive me for asking, but why go with a roundhead body, to use a deadlywind on it? They already make phantom threaded Fiburs...

I can understand if you have multiple markers and are switching it around, but otherwise..

Saint_TGM 03-13-2013 06:21 PM

Quote:

Originally Posted by CxT (Post 2653324)
Forgive me for asking, but why go with a roundhead body, to use a deadlywind on it? They already make phantom threaded Fiburs...

I can understand if you have multiple markers and are switching it around, but otherwise..

Probably a very good question. My answer is that's how I bought my Phantom. It was a good selling point, too, because all I have are cocker barrels, the sell didn't include a barrel, and I didn't want to have to invest in another thread system. This way, everything is interchangeable. Had I been the owner of an original Phantom, I probably would have just bought a Phantom-threaded DW barrel...

KPCS 03-13-2013 08:14 PM

I just used a stock old autococker barrel.
Bored out the pump handle to fit over it ....

http://img35.imageshack.us/img35/5207/p4280028.jpg

Ken W

Ronan_357 03-14-2013 12:43 AM

Doc's fast back with a dye style freak tip, looks just like an old style boom stick.

808Jackal 03-14-2013 03:53 AM

Carter Un-obtanium. Had BOS make me some pumps to fit. I have also used a 2 piece DYE ultralite, Furious Lotus, and a BOA.

idkfa 03-15-2013 01:32 AM

Quote:

Originally Posted by CxT (Post 2653324)
Forgive me for asking, but why go with a roundhead body, to use a deadlywind on it? They already make phantom threaded Fiburs...

I can understand if you have multiple markers and are switching it around, but otherwise..

Exactly, I want all of my guns to be Cocker threaded. I could buy a Phantom threaded Fibur for about $100 or a Roundhead for $75 and use my Cocker Fibur.


All times are GMT -4. The time now is 04:58 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC