mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCI (http://www.mcarterbrown.com/forums/cci/)
-   -   VSC line "upgrade" question (http://www.mcarterbrown.com/forums/cci/230353-vsc-line-upgrade-question.html)

Happy Chewy 04-02-2013 02:05 AM

VSC line "upgrade" question
 
Hi guys I have been considering "upgrading" my VSC setup. I have recently started to use constant Co2 "4oz\3.5" and I'm looking at putting my palmer inline on it. The "problem" is that my valve vsc fitting seems stuck and I can't seem to unscrew it. Is there some special way to do it or am I just doing it wrong?

artguy63 04-02-2013 12:37 PM

Are you talking about the hardline fitting on the valve body?

Take a crescent wrench, twist off. Sometimes, Mike loctites the fittings on from what I hear.

If it's really stuck on, disassemble the valve and stick it in some boiling water to let everything loosen up.

Happy Chewy 04-02-2013 02:50 PM

Thanks i will try that and yes the hardline fitting not the hardline itself

Happy Chewy 04-02-2013 05:26 PM

Apparently kettle water isn't hot enough, but i got the fitting off by lightly tapping an adjustable wrench with a hammer. Now i have run into another "problem". How do you guys run your Palmer setups on the side? With a male to male fitting? (to lazy\tired to search 23:26)

Crashkt90 04-02-2013 05:29 PM

I was thinking about getting and putting in vsc ASA and since I do a reverse drop foreword with a 13ci.

artguy63 04-02-2013 11:10 PM

Quote:

Originally Posted by Happy Chewy (Post 2672740)
Apparently kettle water isn't hot enough, but i got the fitting off by lightly tapping an adjustable wrench with a hammer. Now i have run into another "problem". How do you guys run your Palmer setups on the side? With a male to male fitting? (to lazy\tired to search 23:26)

I believe that's how it's done. If you wanted, you could just get a Phantom specific stab and call it a day. Or buy a cart reg and run it through your vertical adapter.

Happy Chewy 04-02-2013 11:23 PM

There is a Phantom specific stab?

Malafanango 04-03-2013 01:09 AM

Quote:

Originally Posted by Happy Chewy (Post 2673156)
There is a Phantom specific stab?

Palmers makes one that replaces the whole valve.

Happy Chewy 04-03-2013 08:37 AM

Stabilizer not regulator but thanks. I have or at least I think I have figured out how to run my inline stabilizer last night. I just have to do it when I get home. I have cleaned my reg since part of it came apart when I removed the male to male fitting. So rebuilding and setting up my Phantom is on my to do list

Crashkt90 04-03-2013 09:19 AM

Quote:

Originally Posted by Malafanango (Post 2673223)
2 now, palmers and cci with the one for the revolution. It directly replaces the vasa on a vsc phantom.

What's the other one? You got the one made for it, You got the one people put on the side of the valve. What's ASA one?


All times are GMT -4. The time now is 04:02 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC