mcarterbrown.com  

CCI Home of the Phantom Pump Gun

Reply
 
Thread Tools Search this Thread
Old 04-08-2013, 01:59 PM   #1 (permalink)
Newbie
 
Join Date: Oct 2011
Location: Arkansas

Punisher Undercocking Kit VSC Question

I bought this stock class Phantom from a friend, and I've finally decided I want to try it open stock class. (That's the one with a tank/hopper, right?) I have the piece that screws in above the vertical 12 gram changer, but I'm not sure how to get that piece out. It has a Punisher undercocking kit on it, and it looks like it came with a custom vertical ASA, so I don't know if I'd need to do some serious overhaul to get it to work with a tank or not.

There is a seam where I think it should unscrew, but it is extremely tight, so I'm not sure how to get it unscrewed, if it does at all.

Here's a picture for reference, I can take some more if needed:

Thanks for the help!
The Rooster is offline   Reply With Quote
Old 04-08-2013, 02:07 PM   #2 (permalink)
Stock Class Aficionado
 
idkfa's Avatar
 
Join Date: Mar 2007
Location: Vancouver, BC, Canada

CCM Fan
Are you talking about the piercing assembly? 3/8" allen key.
__________________
idkfa is offline   Reply With Quote
Old 04-08-2013, 02:42 PM   #3 (permalink)
Red=Moderator
 
Schmitti's Avatar
 
Join Date: Apr 2006
Location: Albany. NY

First you need to remove the "bucket" which holds the CO2 cartridge. Then if possible, clamp the gun in a vice (protected by rags) so that it isn't going anywhere. Then use the 3/8 allen wrench and insert it into the now exposed face of the cartridge changer assembly (you will see the pierce pin... little silver "pin" surround by a flat, white seal). Turn the allen wrench like you are unscrewing a large screw. Hopefully with a little work, the rest of the assembly will come out of the vertical air adapter (the portion attached to the front of the trigger guard with the hose running to it).

If the vertical adapter moves when you start cranking on the cartridge chamber... STOP! Make sure the two screws holding the adapter on to the guard are tight. If they are tight and the adapter still moves, remove the screws and take the adapter off the gun and put it in a vice (protected with rags) and then try to remove the changer assembly.

E
Schmitti is offline   Reply With Quote
Old 04-08-2013, 02:48 PM   #4 (permalink)
Newbie
 
Join Date: Oct 2011
Location: Arkansas

Quote:
Originally Posted by idkfa View Post
Are you talking about the piercing assembly? 3/8" allen key.


Yes, I'm pretty sure I'm talking about the piercing assembly. It looks like the assembly should screw out so I can screw the piece on the right in.

Are you talking about the screws that are in front of the trigger?

I also apologize for my horrendous lack of Phantom vocabulary.
The Rooster is offline   Reply With Quote
Old 04-08-2013, 02:49 PM   #5 (permalink)
Newbie
 
Join Date: Oct 2011
Location: Arkansas

Ah, this sounds like exactly what I'm wanting to do! Thanks for the in depth post. I'll try this when I get home from work tonight.

Quote:
Originally Posted by Schmitti View Post
First you need to remove the "bucket" which holds the CO2 cartridge. Then if possible, clamp the gun in a vice (protected by rags) so that it isn't going anywhere. Then use the 3/8 allen wrench and insert it into the now exposed face of the cartridge changer assembly (you will see the pierce pin... little silver "pin" surround by a flat, white seal). Turn the allen wrench like you are unscrewing a large screw. Hopefully with a little work, the rest of the assembly will come out of the vertical air adapter (the portion attached to the front of the trigger guard with the hose running to it).

If the vertical adapter moves when you start cranking on the cartridge chamber... STOP! Make sure the two screws holding the adapter on to the guard are tight. If they are tight and the adapter still moves, remove the screws and take the adapter off the gun and put it in a vice (protected with rags) and then try to remove the changer assembly.

E
The Rooster is offline   Reply With Quote
Old 04-08-2013, 02:58 PM   #6 (permalink)
Red=Moderator
 
Schmitti's Avatar
 
Join Date: Apr 2006
Location: Albany. NY

Good deal!

E
Schmitti is offline   Reply With Quote
Old 04-09-2013, 03:38 PM   #7 (permalink)
Newbie
 
Join Date: Oct 2011
Location: Arkansas

Well, turns out I don't have a 3/8" allen key, but looking at my Phantom, I can tell that this was what I was wanting to do with it. Thanks a ton for the help!
The Rooster is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCI

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 09:42 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC