mcarterbrown.com  

CCI Home of the Phantom Pump Gun

Reply
 
Thread Tools Search this Thread
Old 05-13-2013, 06:39 AM   #1 (permalink)
Old school from way back!
 
turbowagonman's Avatar
 
Join Date: Oct 2012
Location: Mentor, Ohio

CCI Bucket changer question

I just picked up my first Stock Class marker since the 80's back when I started playing. When I received the marker the Co2 changer didn't have a pierce pin in it so I picked up a CCI Changer. Well, I contacted the manufacturer of my new marker and they sent me a new pierce pin, it looks the same as the CCI pin. So my questions to you CCI guys are, is there a certain tool to install and remove the pierce pin? If so what is it called?
I have a multitude of tools so I may have something that may work better than a screw driver (to tighten the new one) so is there another type of tool that would work?

Thanks
__________________
Started with a Splatmaster, moved onto a Nelspot 007, then came the Autocockers, then a STERLING Pump, next was a Bob Long defiant then a PM7. As of now I have 4 Sterling Pumps, 2 Phantom for SC and 2 Spyder's plus a bunch of extra parts.


Feedback:
http://www.mcarterbrown.com/forums/f...-feedback.html
turbowagonman is offline   Reply With Quote
Old 05-13-2013, 08:28 AM   #2 (permalink)
Village Idiot
 
Greenmtnphantom's Avatar
 
Join Date: Jul 2006
Location: Graniteville VT
Send a message via AIM to Greenmtnphantom Send a message via MSN to Greenmtnphantom

Fan of EMR
Screwdriver with a notch taken out of the middle to ensure that you don't harm the pierce pin.
__________________
Feedback http://www.mcarterbrown.com/forums/f...-feedback.html Gargoyle FAQ http://isppa.semkhor.com/newswire.asp?ctid=1116
Quote:
Originally Posted by Robertsr View Post
I don't so much make money, as provide a conduit for it's movement.
Stock class = 12grams and a stick feed. End discussion.
Greenmtnphantom is offline   Reply With Quote
Old 05-13-2013, 10:07 PM   #3 (permalink)
more gooder
 
dukie's Avatar
 
Join Date: Apr 2008
Location: Kitchener, Ontario

Fan of EMR
CCM Fan
somone drilled out the end of a phantom velocity tool and used that to do it. I modified a screwdriver. It works well for me.
__________________
3rd Run DRV's in stock now!!
DSGs are in stock NOW!!
V2 DSP - On sale NOW!
My Feedback
first strike pez dispensers in stock - pm me!
dukie is offline   Reply With Quote
Old 05-14-2013, 08:53 AM   #4 (permalink)
Village Idiot
 
Greenmtnphantom's Avatar
 
Join Date: Jul 2006
Location: Graniteville VT
Send a message via AIM to Greenmtnphantom Send a message via MSN to Greenmtnphantom

Fan of EMR
Quote:
Originally Posted by dukie View Post
somone drilled out the end of a phantom velocity tool and used that to do it. I modified a screwdriver. It works well for me.
I think it was CJottawa that did that
__________________
Feedback http://www.mcarterbrown.com/forums/f...-feedback.html Gargoyle FAQ http://isppa.semkhor.com/newswire.asp?ctid=1116
Quote:
Originally Posted by Robertsr View Post
I don't so much make money, as provide a conduit for it's movement.
Stock class = 12grams and a stick feed. End discussion.
Greenmtnphantom is offline   Reply With Quote
Old 05-14-2013, 11:33 PM   #5 (permalink)
MCB Member
 
funsi00's Avatar
 
Join Date: Jul 2006
Location: Cleveland, Ohio

CCM Fan
Brass N Wood Fan
Palmers Fan
I use a modified screwdriver.
__________________
My feedback on MCB : http://www.mcarterbrown.com/forums/f...-feedback.html
Brass Mafia - team status S4



funsi00 is offline   Reply With Quote
Old 05-18-2013, 12:35 AM   #6 (permalink)
Summer's a-commin'
 
cobyrne's Avatar
 
Join Date: Feb 2008
Location: Dunedin, NZ

I just use an unmodified screwdriver - rather than levering the flat bit against the pin and turning the handle, put one side of the screwdriver tip into a notch and the other side of the tip against the inside wall of the pierce pin and 'push' the notch around in a clockwise direction. Works fine and you can use nearly any sized flat head screwdriver.
__________________
MCB Feedback
cobyrne is offline   Reply With Quote
Old 05-18-2013, 07:26 AM   #7 (permalink)
Old school from way back!
 
turbowagonman's Avatar
 
Join Date: Oct 2012
Location: Mentor, Ohio

Quote:
Originally Posted by cobyrne View Post
I just use an unmodified screwdriver - rather than levering the flat bit against the pin and turning the handle, put one side of the screwdriver tip into a notch and the other side of the tip against the inside wall of the pierce pin and 'push' the notch around in a clockwise direction. Works fine and you can use nearly any sized flat head screwdriver.
"I just use an unmodified screwdriver", that's what I did and I still had Co2 leaking out of my "bucket". With that being said; I tried to use the Phantom bucket on the Sterling adapter but the threads aren't deep enough in the bucket to put the cartridge high enough to even puncture it. I tried the Sterling Bucket on the Phantom adapter and the threads are too deep on the bucket for the cartridge to be secure but high enough to puncture it, so it leaks real bad.

All is good though, my Phantom quick changer works just fine and I'll be out using it today to prove it.
__________________
Started with a Splatmaster, moved onto a Nelspot 007, then came the Autocockers, then a STERLING Pump, next was a Bob Long defiant then a PM7. As of now I have 4 Sterling Pumps, 2 Phantom for SC and 2 Spyder's plus a bunch of extra parts.


Feedback:
http://www.mcarterbrown.com/forums/f...-feedback.html
turbowagonman is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCI

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 08:03 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC