|CCI Home of the Phantom Pump Gun|
| ||Thread Tools||Search this Thread|
|07-07-2013, 12:52 PM||#1 (permalink)|
Join Date: Sep 2011
Location: Springfield mo
I bought some orings that I thought would fit my vsc changer the oring that the 12 g holder uses to seal and there all to big. Seems like with the current one the changers not very tight but it still seals. I use the changer as a grip sometimes and if I'm not carefully it will un screw a little and leak.
Be like a duck calm on the surface paddling like the dickens below
|07-07-2013, 02:23 PM||#2 (permalink)|
Join Date: Jan 2011
Location: the 303
The o-ring that is on the bucket side (not the ASA side) of the Bucket Changer pierce pin/ASA adaptor is a 2x15mm.
I can square you away with a couple if you'd like. I sell them for $0.18 each + shipping. See o-ring sale link in my Sig. Hope that helps!
|Thread Tools||Search this Thread|