Old School Phantom W/ Unibody Question

BIG-AL · 05-10-2008, 11:14 AM

Can you put a stock class feed on a unibody right feed Phantom? I think you can but i'm not sure. Also, are these guns compatible with all the Phantom parts such as vertical adapters, gauges, 45 grips, etc.? Any help is appreciated, thank you.

thkyle · 05-10-2008, 04:01 PM

Can't put a stock class feed block and tube on a right feed without cutting off the feed first and tapping threads for the block. You can put an elbow on the right feed tube and stick cigar tubes other end of the elbow or mount a CCI feed tube on an elbow and work it that way. Not really "stock class" legal for the purists, but most people will let you play that way.

Yes, you can replace the old CCI internals with modern Phantom internals.

MrJR · 05-12-2008, 02:30 PM

Most older Phantoms don't have the 2 holes in the trigger frame to add a vertical adapter, but they can be drilled. The unibodies have threaded feedneck, and if you look around and get really lucky, you may be able to find a stickfeed designed to thread in there. Otherwise, you could simply buy a Palmer Stocker tube, or a Noxx55 sc tube that will clamp onto your right feed. Sure, .45 frames are a go. If by "gauges", you mean a valve body threaded for a gauge in the back, then sure.

Schmitti · 05-12-2008, 02:37 PM

No need to cut up a perfectly good unibody. Just buy a new stockclass body and a barrel and re-use your valve body and guts (hammer/bolt)

E

05-10-2008, 11:14 AM	#1 (permalink)
BIG-AL Active Member Join Date: Apr 2008 Location: Boca Raton, FL. Posts: 175	Old School Phantom W/ Unibody Question Can you put a stock class feed on a unibody right feed Phantom? I think you can but i'm not sure. Also, are these guns compatible with all the Phantom parts such as vertical adapters, gauges, 45 grips, etc.? Any help is appreciated, thank you.

05-12-2008, 02:30 PM	#3 (permalink)
MrJR Seasoned Member Join Date: Apr 2006 Posts: 700	Most older Phantoms don't have the 2 holes in the trigger frame to add a vertical adapter, but they can be drilled. The unibodies have threaded feedneck, and if you look around and get really lucky, you may be able to find a stickfeed designed to thread in there. Otherwise, you could simply buy a Palmer Stocker tube, or a Noxx55 sc tube that will clamp onto your right feed. Sure, .45 frames are a go. If by "gauges", you mean a valve body threaded for a gauge in the back, then sure. __________________ My Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

05-10-2008, 04:01 PM	#2 (permalink)
thkyle MCB Member Join Date: Sep 2006 Location: Steelers Country Posts: 285	Can't put a stock class feed block and tube on a right feed without cutting off the feed first and tapping threads for the block. You can put an elbow on the right feed tube and stick cigar tubes other end of the elbow or mount a CCI feed tube on an elbow and work it that way. Not really "stock class" legal for the purists, but most people will let you play that way. Yes, you can replace the old CCI internals with modern Phantom internals.