pmp adaptor

VIP3R · 07-05-2008, 06:15 AM

does this work worth anything or you better off getting a different breech?

PMP Industries - Paintball supplies - Product Detail

thanks

Hatchet · 07-05-2008, 10:04 AM

Well, I don't have any experience with the product, but it looks fairly solid in the pictures. For the same price you could just buy a new breech, but this would certainly be quicker. Especially if you've got an undercocking kit on your phantom. Sure is a pain in the ass to change breeches with a UC kit.

Murph · 07-05-2008, 10:31 AM

I've got it on my phantom, it works just fine, I just get a ton of double feeds with it. You definitely wanna rock back when you cock it.

VIP3R · 07-05-2008, 05:48 PM

so would u recommend a center feed instead?

Jordy7 · 07-05-2008, 06:11 PM

here is a whole review from a guy on special ops forum

jordy7

We (Doubleshot and I) have been working on building open class phantoms. We already have vsc. We ordered a center feed breech from CCI and discovered that the feedneck was extremely tall. We were going to cut it using a pipecutter, but discovered this online. It's an adapter that attaches to a stock-class breech and is threaded for ION/IMPULSE feednecks. We figured we'd try it. It came today. After a quick trip to the local pro-shop to get the feedneck (it's a New Designz, I think, she bought it smile.gif) here are the results.
This is the center feed breech with the required feedneck and a Supershot hopper.

Here is the stock class breech with the PMP adapter piece and ION feedneck with the same hopper.

Sideviews of the same configurations above:

We haven't measured to see the exact height difference, but it's obvious enough for me to ask:
Anyone want to buy a centerfeed breech? smile.gif
I realize that the PMP adapter plus the feedneck is more than a center feed breech. Cost was not the issue. We were going for functionality. It well succeeds.

VIP3R · 07-05-2008, 07:45 PM

well hows the performance. sure its shorter. but how does it perform holding the weight? im assuming he likes it more.

idkfa · 07-10-2008, 08:01 PM

That SpecOps review is a bit out there in my personal opinion. I have never seen anyone actually use a straight feed neck. They either jam a winchester and use a hose clamp, or do a feedneck mod and use an Ego clamping feedneck. I get the point of the review, but it seems to be of questionable intent. Either way, if it works...

JOESPUD27 · 07-11-2008, 10:14 AM

I have one on my Phantom. I should take a picture someday.

I don't have a problem with double feeds using a Winchester & a SportShot, with a Redz Feedneck.

Jay

VIP3R · 07-11-2008, 04:18 PM

thanks

McOxy · 07-11-2008, 04:41 PM

i have one on my phantom, i havent gotten a chance to use it in a game (literaly got my phantom yesterday), but i put it on and is seems to be secure and doesn't wiggle (tried putting a loaded halo on it, didn't move.)

07-05-2008, 06:15 AM	#1 (permalink)
VIP3R Active Member Join Date: Jul 2008 Location: Arizona	pmp adaptor does this work worth anything or you better off getting a different breech? PMP Industries - Paintball supplies - Product Detail thanks

07-05-2008, 07:45 PM	#6 (permalink)
VIP3R Active Member Join Date: Jul 2008 Location: Arizona	well hows the performance. sure its shorter. but how does it perform holding the weight? im assuming he likes it more. Last edited by VIP3R; 07-06-2008 at 04:09 AM..

07-10-2008, 08:01 PM	#7 (permalink)
idkfa Stock Class Aficionado Join Date: Mar 2007 Location: St. John's, NL, Canada	That SpecOps review is a bit out there in my personal opinion. I have never seen anyone actually use a straight feed neck. They either jam a winchester and use a hose clamp, or do a feedneck mod and use an Ego clamping feedneck. I get the point of the review, but it seems to be of questionable intent. Either way, if it works... __________________ MCB Feedback The PhOG Feedback eBay Feedback

07-11-2008, 10:14 AM	#8 (permalink)
JOESPUD27 Seasoned Member Join Date: Apr 2006 Location: St. Louis Area	I have one on my Phantom. I should take a picture someday. I don't have a problem with double feeds using a Winchester & a SportShot, with a Redz Feedneck. Jay __________________ Have Nice HB Pump, Want Ego or Vice/Protoge. PM if interested. Xtreme Paintball Park, Home of Total Greif CCM - Check out their Ebay Store Guerrilla Air Tanks & Regs Support Pump Sponsors Because They Support Us!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

07-05-2008, 10:04 AM	#2 (permalink)
Hatchet Active Member Join Date: Dec 2006	Well, I don't have any experience with the product, but it looks fairly solid in the pictures. For the same price you could just buy a new breech, but this would certainly be quicker. Especially if you've got an undercocking kit on your phantom. Sure is a pain in the ass to change breeches with a UC kit.

07-05-2008, 05:48 PM	#4 (permalink)
VIP3R Active Member Join Date: Jul 2008 Location: Arizona	so would u recommend a center feed instead?

07-05-2008, 06:11 PM	#5 (permalink)
Jordy7 MCB Member Join Date: Jun 2008 Location: slc utah	here is a whole review from a guy on special ops forum jordy7 We (Doubleshot and I) have been working on building open class phantoms. We already have vsc. We ordered a center feed breech from CCI and discovered that the feedneck was extremely tall. We were going to cut it using a pipecutter, but discovered this online. It's an adapter that attaches to a stock-class breech and is threaded for ION/IMPULSE feednecks. We figured we'd try it. It came today. After a quick trip to the local pro-shop to get the feedneck (it's a New Designz, I think, she bought it smile.gif) here are the results. This is the center feed breech with the required feedneck and a Supershot hopper. Here is the stock class breech with the PMP adapter piece and ION feedneck with the same hopper. Sideviews of the same configurations above: We haven't measured to see the exact height difference, but it's obvious enough for me to ask: Anyone want to buy a centerfeed breech? smile.gif I realize that the PMP adapter plus the feedneck is more than a center feed breech. Cost was not the issue. We were going for functionality. It well succeeds.

07-11-2008, 04:18 PM	#9 (permalink)
VIP3R Active Member Join Date: Jul 2008 Location: Arizona	thanks

07-11-2008, 04:41 PM	#10 (permalink)
McOxy Newbie Join Date: Jul 2008	i have one on my phantom, i havent gotten a chance to use it in a game (literaly got my phantom yesterday), but i put it on and is seems to be secure and doesn't wiggle (tried putting a loaded halo on it, didn't move.)