|CCI Home of the Phantom Pump Gun|
| ||Thread Tools||Search this Thread|
|08-17-2008, 11:01 AM||#1 (permalink)|
Join Date: Mar 2008
i have a vsc and yesterday i was playing, went to take a 12gram out of the cci changer and the 12gram was stuck and some little metal pieces and an oring came out. the oring would not stay in so i am assuming the metal pieces held it in in some way.
also i have a 3.5 and a 4 oz tank. the 4 oz screws in fine but i screw the 3.5 in and it doesn't air up the phantom at all.
so is my cci changer now just junk? and is that common on 3.5 oz tanks, it is an older brass eagle tank.
|08-17-2008, 12:55 PM||#2 (permalink)|
Join Date: Jan 2008
You know that it is filled for sure...?
Than, besides the obvious, people do talk a lot against the brass eagle tanks and say its dangerous. So it could just be a error with the tank. Personally, mine works like a charm.
|08-17-2008, 12:59 PM||#3 (permalink)|
Join Date: Mar 2006
Location: North East Texas
If you toss up pics of the parts and where they came from I could most likely tell you what was going on and help you correct it.
My FS Listing
My feed back:
Carter's Commando Texas Division:
|08-19-2008, 11:52 AM||#6 (permalink)|
Join Date: Sep 2006
If the threads are still good on the bucket changer, you can replace the pierce pin assembly. Go to the CCI site and order one. They don't cost much at all.
As for the 3.5 oz, sometimes the post in the center of the asa isn't long enough to depress the valve pin on some older style tank valves. If the valve on your tank is bad, I suggest having your local pro-shop put an on/off valve in the tank for you.
|Thread Tools||Search this Thread|