|CCI Home of the Phantom Pump Gun|
| ||Thread Tools||Search this Thread|
|08-19-2008, 10:19 PM||#1 (permalink)|
Join Date: Jul 2008
qloader + phantom= good idea?
played at the ole' local field this weekend with my new vsc phantom with against the usual barrage of electronics and response tippmanns and discovered a desire for carrying more than 15 rounds in the gun at a time. I don't really want to use a rf/lf/cf body because I want to maintain the advantages afforded by a hopper free profile. Anybody foresee problems with plugging the qloader feed hose into the horizontal body? I don't yet own a qloader so I don't know if i would need to craft an adapter or if the hose would just plug right in, but I can't imagine that would be terrible difficult to engineer something. Do you think the force feed would result in double feeds? As far as mounting I was thinking about buying the qloader cms mounting socket and attaching it to the .45 frame right under my t-stock. That seemed to me to be the simplest alternative. Other than that, all I can think of is crafting a larger version of wwa's tank rings to hold the qloader socket or drilling out my t stock and screwing it in that way (although I must admit the thought of drilling makes me cringe, I've done enough drilling in my life to know that sometimes things are better left undrilled) Thoughts?
|08-19-2008, 10:48 PM||#2 (permalink)|
Join Date: Sep 2007
i think it would completely unbalance the gun.
A liberal reporter once asked an army sniper "what d you feel when you shoot you targets?"
His quick response was "recoil".
"A veteran is someone who, at one point in his life wrote a blank check Made payable to 'The United States of America ' for an amount of 'up to and including my life.' That is Honor, and there are way too many people in This country who no longer understand it.'
|08-19-2008, 11:30 PM||#4 (permalink)|
Join Date: Mar 2006
Location: North East Texas
RayU on here shoots a Q'ed Phantom the set-up is pretty nice!
My FS Listing
My feed back:
Carter's Commando Texas Division:
|08-19-2008, 11:39 PM||#5 (permalink)|
Join Date: May 2008
Get a T or L stock and mount the Q loader under or over it. But I think it would look bad and mess up the balance.
Just me, to each his own.
I am become death, the destroyer of worlds.
J. Robert Oppenheimer
The only thing necessary for the triumph of evil is for good men to do nothing. -Edmund Burke
I'm waiting till 2019 when SP's monopoly over electronics finally ends!
|08-20-2008, 11:08 AM||#7 (permalink)|
Old & Slowing Down
Join Date: Sep 2006
Location: Dallas, TX
(I don't cruise the forums often these days - Crash sent me a PM)
Sorry, I don't have pics, and my Q is currently not mounted on my Phantom. My mounting socket had broke, they sent me replacement parts, but I haven't gotten around to mounting the system back on my Phantom yet.
I used the CMS system to clamp the system onto my vertical ASA & Stabilizer reg (the vertical ASA by itself is not long enough for the clamp), running parallel to the Phantom. Then I had a short section of hose running to my RF with a 90 degree elbow (which I reused from my Warp feed system).
I'm a lefty, so using RF means that it puts the Q system in front of my body, the loader tube somewhat below my chin. Makes for a very tight, compact setup. And yes, I used to run a Warp system on my Phantom! The weight of the Q on one side doesn't make it imbalanced any more than running a LF/RF hopper, maybe less. The Warp, on the other hand, made everything heavy.
My set up seemed to work well, until the mounting socket broke. But I also have a concern that over time, the additional forces on the vertical ASA and trigger guard would cause the trigger guard to break. I'm currently pondering over a new mounting set up, but I'll need to fabricate/rig up mounting parts.
|08-20-2008, 10:28 PM||#8 (permalink)|
Join Date: Jun 2008
Location: slc utah
if you plug the feed hose in to the horizontal feed the pressure will stop the balls from feeding try filling you feed tube up and putting pressure on the ball stack it wont feed because instead of pressure the first ball into the gun it pushes it forward past the hole because theres room forward of the hole you would need to make some some sort ramp out of epoxy for it to feed at all
|08-21-2008, 12:11 AM||#9 (permalink)|
Join Date: Nov 2007
|Thread Tools||Search this Thread|