|CCI Home of the Phantom Pump Gun|
| ||Thread Tools||Search this Thread|
|05-31-2009, 10:20 AM||#1 (permalink)|
Join Date: May 2009
i have a set of the seals and spring kit from wevo...
is there anyone that sells the o rings in a box for the phantom ?
I want to stack up on them as i live in the Uk and just want to do one order thats all....
Many thanks in advance
|05-31-2009, 02:25 PM||#2 (permalink)|
Corp Por, Kal Vas Flam
Join Date: Jul 2008
Location: Spokane, WA
cheapest thing to do is order them in bulk 100 packs from a distributor in the UK
should be no more than a couple euros for each 100 pack as they are standard size buna-N, if you go for the urethane orings (higher quality) then expect around 10 euros for a 25 pack
|06-01-2009, 03:32 AM||#4 (permalink)|
Machinist in training
I don't think you want urethane for the Phantoms. You want to use B-70 for the all of 2 (4 if it has a bucket changer) it has. On the bolt it provides a good seal and also when it fits into the breech it acts as a weak bolt lock that is nice if you run without a return spring. And, on the valve retaining nut, B-70 works fine. On the bucket, there are 2 tank o-rings. One has a shallower groove and fits tightly into the ASA to keep the pierce part of the bucket stationary, and the other has a deeper groove to provide resistance to the bucket when it's screwed in.
|Thread Tools||Search this Thread|