mcarterbrown.com  

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 05-30-2010, 07:51 PM   #41 (permalink)
Red - Black
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Boy - I am not sure what type of gas that is made for....

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 05-31-2010, 04:00 AM   #42 (permalink)
Owld Skewl
 
woodwose's Avatar
 
Join Date: Nov 2008



For those of you that tend to frequent random surplus stores, you can get automotive air conditioning testers for cheap. They usually have nice and big 0-500psi gauges.

And don't skimp on the check valve. For regulator testing, you absolutely need to see how the reg refreshes after being discharged. Any reg can get to a pressure and stay there, but you will only see problems if you check how solid the reg is when you dump and refresh the pressure a couple times.

'wose
__________________
"Boom! Headshot'" -FPS Doug [ MCB feedback eBay Feedback ]
woodwose is offline   Reply With Quote
Old 05-31-2010, 06:52 AM   #43 (permalink)
starts off small at first
 
splattttttt's Avatar
 
Join Date: Apr 2006
Location: Bean Town, U.S.A.

Looks like a standard output pressure gage. Why not?
__________________
"Democracy is the worst form of government except for all the others which have been tried." Winston Churchill

THE-SHOOTIST Anyone chubbin' like me for this?
mailmanmike Since Monday! That's more than 4 hours though, so according to those cialis ads I should see my doctor.
tlane77 I think for a non-chemical chubby it's 6 hours before its time to see a doctor. So you should be good for another couple hours.
splattttttt I wasn't goin to google "chubbin" because I assumed it had to do with fat. The lard type, not the fun stuff. But what ever feelings Jeff's experiencing, then they must be of the fun like stuff...
tlane77 He's got a woody for your woods.
splattttttt land
splattttttt is offline   Reply With Quote
Old 06-05-2010, 03:04 AM   #44 (permalink)
Metal Whittler
 
Rednecksniper's Avatar
 
Join Date: Apr 2008

Brass N Wood Fan
Palmers Fan
my gauge!




0-400, 4" dial, glycerin filled goodness.
Rednecksniper is offline   Reply With Quote
Old 06-05-2010, 08:13 AM   #45 (permalink)
starts off small at first
 
splattttttt's Avatar
 
Join Date: Apr 2006
Location: Bean Town, U.S.A.

No check valve?
__________________
"Democracy is the worst form of government except for all the others which have been tried." Winston Churchill

THE-SHOOTIST Anyone chubbin' like me for this?
mailmanmike Since Monday! That's more than 4 hours though, so according to those cialis ads I should see my doctor.
tlane77 I think for a non-chemical chubby it's 6 hours before its time to see a doctor. So you should be good for another couple hours.
splattttttt I wasn't goin to google "chubbin" because I assumed it had to do with fat. The lard type, not the fun stuff. But what ever feelings Jeff's experiencing, then they must be of the fun like stuff...
tlane77 He's got a woody for your woods.
splattttttt land
splattttttt is offline   Reply With Quote
Old 06-05-2010, 09:40 AM   #46 (permalink)
Red - Black
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Splat,

He has a quick disconnect on that bad boy - it probably hooks to a rig with a slide check.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 06-05-2010, 12:37 PM   #47 (permalink)
Metal Whittler
 
Rednecksniper's Avatar
 
Join Date: Apr 2008

Brass N Wood Fan
Palmers Fan
i have an on/off with a QD nipple on one side and a slide check on the other (to purge the reg).
Rednecksniper is offline   Reply With Quote
Old 06-05-2010, 05:42 PM   #48 (permalink)
I work too much
 
jasse's Avatar
 
Join Date: Jan 2009
Location: Sweden

CCM Fan
Quote:
Originally Posted by Talfuchre View Post
Why Have One?

I often check my tanks and in-line regulators to make sure they are working and not creeping. The On-Off is for tanks that have pin valve but not needed for in line regulators. The Down Stream Bleed is used for not only bleeding off excess pressure when the testing is done but also testing for recharge rate and creep. Simply turn on the air and let the gauge settle at the PSI it is set at - then toggle the Down Stream Bleed back and forth and see if the regulator rests quickly or creeps.

When I sweet spot my markers for the proper PSI I check the number on my Pressure gauge and then when I clean or need to rest the marker I simply turn it up to the desired PSI and do not have to go through the process of sweet spotting my regulator again.

Testing your in line regulator is also essential when trying to figure out what is wrong with a marker. If your marker is inconsistent but you know your reg is testing fine - you donít have to waste time or parts in cleaning and replacing seals (that may be fine) in your in line reg.

This is a simple thing to have in your gear bag - but nice to have when you need it.

Hope this helped.
How do you test the inline regulator ???
Do you unscrew it from the gun and screw in into this thingie ???
I makes sense but I just want to be sure.

(I might need on since my J2L won't shoot paint at all)
__________________
Deadbox before dishonor
jasse is offline   Reply With Quote
Old 06-05-2010, 06:30 PM   #49 (permalink)
Owld Skewl
 
woodwose's Avatar
 
Join Date: Nov 2008

Quote:
How do you test the inline regulator ???
Do you unscrew it from the gun and screw in into this thingie ???
Exactly.

If your CCM is not shooting right, try replacing both springs. Those things can be picky about having good new springs. I got a n old S5 and it wouldn't shoot above 200 and sweet spotted at like 150psi. I replaced the springs and it shoots perfectly at the recommended pressures.
__________________
"Boom! Headshot'" -FPS Doug [ MCB feedback eBay Feedback ]
woodwose is offline   Reply With Quote
Old 06-06-2010, 02:09 AM   #50 (permalink)
I work too much
 
jasse's Avatar
 
Join Date: Jan 2009
Location: Sweden

CCM Fan
Quote:
Originally Posted by woodwose View Post
Exactly.

If your CCM is not shooting right, try replacing both springs. Those things can be picky about having good new springs. I got a n old S5 and it wouldn't shoot above 200 and sweet spotted at like 150psi. I replaced the springs and it shoots perfectly at the recommended pressures.
Are you talking about the springs in the regulator ???
__________________
Deadbox before dishonor
jasse is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 01:47 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC