mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCM (http://www.mcarterbrown.com/forums/ccm/)
-   -   CCM frame compatibility question (http://www.mcarterbrown.com/forums/ccm/128459-ccm-frame-compatibility-question.html)

Riddler 07-24-2010 06:54 PM

CCM frame compatibility question
 
Hey all,
So the Westwood 'cocker I picked up on Ebay recently is a '97 body, meaning it has the non-threaded IVG that is retained by the beavertail screw. I'm looking at picking up a CCM minicocker AT pump kit for it with the frame and everything, and I know they have the beavertail that threads into the back of the frame, but I can't recall if there's still a screw hole there that will allow me to lock down the IVG. Anyone able to check one of theirs for me?

Thanks in advance!

Slider_68 07-24-2010 07:00 PM

no screw hole, but you might be able to find a set screw that you could lock it down with then put on the frame, But then adjusting would be a pain.

Riddler 07-24-2010 07:09 PM

Thanks for the reply!

It would only be disassembly that would potentially be more annoying. The IVG has a fixed external sleeve with an internal worm gear that is adjustable from the back, much like a rex dialer.

Hum, so I guess I'd need a grub screw...

LudavicoSoldier 07-25-2010 12:57 PM

Yup! A 10/32 grub screw is what you need!

Julien 07-25-2010 02:12 PM

pumping a westwood!?!?:huh:

dear mother of god........

it better have come with no pneumatics otherwise velcor will not approve....

Riddler 07-25-2010 02:29 PM

it's getting a full rebuild: pneus, some of the internals, and anodizing. i figured i might as well have a pump kit done to match. :)

the underdog 07-26-2010 11:38 AM

Also not to thread-jack, but the title is appropriate for another question as well.

Will the T2 frames fit on a pgp or other rounded gun?

superman 07-26-2010 01:26 PM

idk about the pgp question

but for the westwood i would drill a hole so that you could remove the grub enough to dissasemble, would save u some hassle of taking the grip frame off every time.

Riddler 07-26-2010 01:59 PM

Quote:

Originally Posted by superman (Post 1406031)
idk about the pgp question

but for the westwood i would drill a hole so that you could remove the grub enough to dissasemble, would save u some hassle of taking the grip frame off every time.

i may do that, thanks... would definitely want to do it prior to anodizing. will have to look at it first to ensure that the beavertail isn't threaded through that area.

Quote:

Originally Posted by the underdog (Post 1405905)
Also not to thread-jack, but the title is appropriate for another question as well.

Will the T2 frames fit on a pgp or other rounded gun?

no worries! and i'm sorry, i don't know if the frame holes or sear line up, or if the curve radius is even the same, for that matter.


All times are GMT -4. The time now is 06:47 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC