mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCM (http://www.mcarterbrown.com/forums/ccm/)
-   -   Loose pump scratching barrel on t2 (http://www.mcarterbrown.com/forums/ccm/128655-loose-pump-scratching-barrel-t2.html)

BIG BOB 07-26-2010 03:53 PM

Loose pump scratching barrel on t2
 
Used my t2 for the first time and near the end of the day I noticed that my pump was scratching my barrel and it seemed like my pump had much more play in it than the other t2's around. What do I need to do to fix this? I havent done anything other than air this gun up and shoot paint out of it.

freebird 07-26-2010 04:19 PM

Quote:

Originally Posted by BIG BOB (Post 1406209)
Used my t2 for the first time and near the end of the day I noticed that my pump was scratching my barrel and it seemed like my pump had much more play in it than the other t2's around. What do I need to do to fix this? I havent done anything other than air this gun up and shoot paint out of it.

there are two Torx screws on your sled/backblock, you need to ensure they are loctighted in place and nice and snug, When doing this tighten each one slowley, constantly checking if the handle is level by looking at the marker down the barrel from the front. (no air or paint please.....:gunsfiring:)

CCM CHICK 07-26-2010 04:27 PM

Call and feel free to talk to our tech Rod, M-F 8-4pm PST.

SPC. Cejka 07-26-2010 05:29 PM

I was getting a little play in the pump handle. Never really noticed it until I checked the barrel and there was a scratch the was less than half an inch long. The scratch is on the left side of the marker, I am going to try and tighten them up and see if it fixes it.


All times are GMT -4. The time now is 09:41 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC