mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCM (http://www.mcarterbrown.com/forums/ccm/)
-   -   ss-25 pump arm length (http://www.mcarterbrown.com/forums/ccm/129547-ss-25-pump-arm-length.html)

wrongbloke 08-03-2010 07:53 AM

ss-25 pump arm length
 
Looking at an ss-25 right now and it comes w/ an AT-cam but the rod is not tapped. Checked out CCM's store and I see a few differnt lengths. Which is the one that will fit the SS-25?

CCM Drilled Standard Pump Arm 10.29" - 4D0048-SD - eBay (item 280530382365 end time Aug-04-10 09:07:29 PDT)

CCM Drilled S6 Pump Arm 9.615" - 4D0048-S6-D - eBay (item 150464896421 end time Aug-06-10 12:13:37 PDT)

CCM Drilled Old Standard Pump Arm 10.67" - 4D0048-OS-D - eBay (item 150457431759 end time Aug-17-10 12:52:42 PDT)

These are about $30 as you can see so I am also looking for cheaper alternatives if anyone has any suggestions. :D I just want to avoid sending the whole marker out just to get the pump arm drilled b/c then I cant play w/ it!

Cheap-o 08-03-2010 02:10 PM

the SS25 is a mini, correct? It should be a mini length if that is the case.

Call Mel

crazyorigin 08-03-2010 02:31 PM

I will measure mine later for you when I get my guns out to welcome their new baby sister when I get home and see the mailman. I need to make a new rod for mine to get rid of the AT hole.

crazyorigin 08-03-2010 10:27 PM

10.5 inches is the length of mine from pump plate face to back of the backblock.

Cheap-o 08-04-2010 01:04 AM

so 11 inches (give 1/4" on each side for threads)

crazyorigin 08-04-2010 07:19 AM

No, its 10.5 including the threads, I would say there is more like a 1/2" of threads on each end.


All times are GMT -4. The time now is 04:30 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC