S6 Frnt Block?
 

Is it possible to mount a mech front block on a S6 or does milling need to be done

I have heard of a couple out there but haven't seen one. I plan to build one sometime. It would be the ultimate full body semi cocker.

there is no hole in the ASA for your 3 way plunger/rod

Get an first gen S6 and a normal vertical asa. The first gens are the ones with the removable vertical asa. I've mounted all the hardware on it and it actually aired up and was firing with a leak from the 3 way, but all the critical concern points (ASA, frontblock) were sealing up.

The 2nd gen S6's, I would say don't bother...

yeah, youd have to find a way to mill a hole for 3 way, without interfering with air passage..

i was unaware Gen1 S6's could take standard ASA's

Or you could e-blade it and not worry about the three-way...

Even if you eblade it, you still need a new asa because of the guide rod sticking out in front.

See, it does work, I just did it, but now I must remove these sinful parts off her.

http://i29.photobucket.com/albums/c2...s/000_0008.jpg

http://i29.photobucket.com/albums/c2...s/000_0010.jpg

http://i29.photobucket.com/albums/c2...s/000_0012.jpg

That frame is an abomination on that gun.

Good work though

Jay

The guide rod's easy to remove, it's just threaded in there and locktighted in.

thats kinda really cool.
A nice CCM frame/pneus and it would be awesome.

how is the fit on the asa? is it sloppy?