mcarterbrown.com  

CCM Chipley Machine

Closed Thread
 
Thread Tools Search this Thread
Old 09-25-2010, 08:59 PM   #1 (permalink)
Whats Paintball Gun? NOT
 
Join Date: Jun 2009
Location: Victoria BC Canada

need help problem with s6.5

I recently cleaned my 6.5 but today when I went to chrono it before i go out to the field on sunday it would fire, but it would not auto-trigger. can any one tell me what is wrong??.

Len
Lift-off Oversteer is offline  
Old 09-25-2010, 09:08 PM   #2 (permalink)
Fluffy Bunnies for life!!
 
Jkoselka's Avatar
 
Join Date: Jul 2010
Location: State of Confusion

CCM Fan
IMHO sounds like you have to adjust the timing for the AT. Check out the manuels that TF has, should help you out. He will chime in a minute.
__________________
America is all about speed. Hot, nasty, bada$$ speed. -Eleanor Roosevelt, 1936
FLUFFY BUNNIES PUMP

Ebay Feedback
MCB Feedback
Jkoselka is offline  
Old 09-25-2010, 09:28 PM   #3 (permalink)
Whats Paintball Gun? NOT
 
Join Date: Jun 2009
Location: Victoria BC Canada

how do you adjust for the 6.5 their is no cocking rod for me to gauge where it engages.
Lift-off Oversteer is offline  
Old 09-25-2010, 09:33 PM   #4 (permalink)
3rdEyEVision
 
Join Date: Jun 2008
Location: nashville tn

CCM Fan
If you have a cocking rod laying around, it should fit in there for assistance
__________________
my feedback: Brokenzipper's MCB feedback
3rd Place NPPL HB 2010
HOOSSP
Honorary Order of Over Six-foot Snake Players
brokenzipper is offline  
Old 09-25-2010, 09:44 PM   #5 (permalink)
Whats Paintball Gun? NOT
 
Join Date: Jun 2009
Location: Victoria BC Canada

when I pull the trigger the trigger moves the pump handle back about quarter inch if this help to diagnosis my problem if I had a spare cocking rod where would I put it ???
Lift-off Oversteer is offline  
Old 09-25-2010, 10:42 PM   #6 (permalink)
Fluffy Bunnies for life!!
 
Jkoselka's Avatar
 
Join Date: Jul 2010
Location: State of Confusion

CCM Fan
Sounds like the auto trigger adjusment screw in the trigger frame is too far in. Does it bind alittle when you pump it?
__________________
America is all about speed. Hot, nasty, bada$$ speed. -Eleanor Roosevelt, 1936
FLUFFY BUNNIES PUMP

Ebay Feedback
MCB Feedback
Jkoselka is offline  
Old 09-25-2010, 10:48 PM   #7 (permalink)
Olde Basterd#2
 
Feyd's Avatar
 
Join Date: Oct 2008
Location: Combat Zone club 66

CCM Fan
Kilt Fan
Or the lug is to low. If he took it apart to clean it he may have dropped the lug down to low and it will fire but be sketchy when auto triggered. I did the same thing first time I took mine apart. Feyd.................
__________________
Feyd is offline  
Old 09-25-2010, 10:58 PM   #8 (permalink)
Red
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Back off the lug 1/2 turn. See what that does - your marker should fire in AT with the back block 1/8th away from the body.

If your 1/2 turn has gone too far - turn the lug in a little at a time until the spacing is right.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline  
Old 09-25-2010, 11:31 PM   #9 (permalink)
Closed bolt FTW
 
shadow102's Avatar
 
Join Date: Mar 2010
Location: Acworth, Ga

CCM Fan
you cant use a cocking rod in the s6.5 hammer there is no threads in the hammer if i remember correctly.

but yeah the hammer lug is probably improperly adjusted
__________________
My feedback
shadow102 is offline  
Old 09-25-2010, 11:47 PM   #10 (permalink)
Whats Paintball Gun? NOT
 
Join Date: Jun 2009
Location: Victoria BC Canada

Ok so what would cause the pump handle to move backwards when i pull the trigger??

jkoselka. the pump doesn't bind

feyd. when I hold the trigger down and pump the handle I don't feel a "click" to know that the hammer has engaged

TF. about how far should the lug be in from the top of the hammer


thank you all for you help
Lift-off Oversteer is offline  
Closed Thread

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 05:34 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC