mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCM (http://www.mcarterbrown.com/forums/ccm/)
-   -   CCM feedneck for my Karnivor Pump. (http://www.mcarterbrown.com/forums/ccm/139923-ccm-feedneck-my-karnivor-pump.html)

240SX 11-10-2010 09:18 PM

CCM feedneck for my Karnivor Pump.
 
I'm looking to but a CCM feedneck for my Karnivor pump but I'm having a hard time deciding between the 1" NoPro, and the 1.5" NoRise. I'm wondering if the 1" will grab enough of the loader. Any suggestions?

blue_baron 11-10-2010 10:31 PM

Go With the no-pro, Barry. It'll grip your feedneck no problem.

240SX 11-10-2010 10:37 PM

Thanks.

nostayhome 11-11-2010 11:17 AM

Quote:

Originally Posted by 240SX (Post 1543272)
I'm looking to but a CCM feedneck for my Karnivor pump but I'm having a hard time deciding between the 1" NoPro, and the 1.5" NoRise. I'm wondering if the 1" will grab enough of the loader. Any suggestions?

It really depends on the hopper that you are using. The feedneck will grip approximately 1/2in of the feedneck. If you are using a pocket hopper, you should be fine.

Mel 11-11-2010 03:32 PM

Barry-
Please keep in mind when using the No-Pro feednecks, we strongly suggest cutting down the hopper neck by about half an inch.

240SX 11-11-2010 04:42 PM

The hoppers that I would be using would be either a 50 round windchester, a sportshot, Rotor or a Revvy.

Tracker 11-11-2010 06:07 PM

rotors work fine by themselves with a no-pro

sportshots i dont think cut down very well (something about a taper in the plastic) becomes too loose if you cut it

revy might work, thought i would suggest you use one of those aluminum spreader thingies, it will provide enough support for the clamp ring to get a good solid bite

winchesters, i THINK would work, but the necks on those things are so flimsy without support.. re-inforcing them is kind of a necessity to get them to work without breaking anyways,

Tracker

Cunha 11-15-2010 02:23 PM

Whatever the consequences - the No Pro is the only decent looking feedneck for the Karni so just make it work.

zeroae86 11-15-2010 04:58 PM

Quote:

Originally Posted by Cunha (Post 1548434)
Whatever the consequences - the No Pro is the only decent looking feedneck for the Karni so just make it work.

i agree, but the no rise holds my sportshot, prophecy and winny much better....and it doesn't look too bad in a karni

pakalolo 11-19-2010 05:09 AM

no pro is the way to go

http://i49.photobucket.com/albums/f2...cture172-2.jpg


All times are GMT -4. The time now is 09:46 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC