|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|03-05-2011, 08:21 PM||#1 (permalink)|
Baby Whale Blowhole Punch
Interesting thing happened to my AT
Was using my J2L today and found that I couldn't pull the trigger anymore. I checked the AT assembly and found that it had somehow creeped out of the grip frame. I took the lever off, placed the assembly back in the frame then put the lever back on. Problem solved, BUT where the AT assembly used to fit snugly in the frame now it's a bit wobbly. Anyone have any possible explanations? I'd rather not damage it further.
Thanks in advance!
Proud owner of his first CCM gun :]
|03-08-2011, 07:16 AM||#4 (permalink)|
ccm makes a pin that fits in there now. dunno if the pin will fit in the same frame as the ball and spring.
my feedback: Brokenzipper's MCB feedback
3rd Place NPPL HB 2010
Honorary Order of Over Six-foot Snake Players
|03-08-2011, 11:13 AM||#6 (permalink)|
Blue - Red
Pin does not only NOT fit in that spot - but does not even go on the same side of the frame.
You need the ball bearing and spring for that frame. But the fix is easy.
Pumpenstein - NSA National Champions
TF's MCB Trust.
|Thread Tools||Search this Thread|