mcarterbrown.com
 

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 03-08-2011, 01:50 AM   #1 (permalink)
Active Member
 
wilted_bunker's Avatar
 
Join Date: Dec 2008
Location: Rossmoor, CA

CCM Fan
SS-25 stock class feed on a t2?

Will a T2 accept an ss-25 stick feed? Will it clear the bolt pin? A friend of mine is willing to sell me his, but he lives about 2 hours away, and we were unable to test it because he didn't have it on him.

Does ccm still produce stock class feeds? Or was that a limited run for the T2?

Thanks.
__________________
Feedback: MCB
wilted_bunker is offline   Reply With Quote
Old 03-08-2011, 07:00 AM   #2 (permalink)
3rdEyEVision
 
Join Date: Jun 2008
Location: nashville tn

CCM Fan
The cci style will not clear the bolt pin. the old ccm style will. hard to find the ccm ones.
__________________
my feedback: Brokenzipper's MCB feedback
3rd Place NPPL HB 2010
HOOSSP
Honorary Order of Over Six-foot Snake Players
brokenzipper is offline   Reply With Quote
Old 03-08-2011, 07:50 AM   #3 (permalink)
.67cal Buwwets!
 
crazyorigin's Avatar
 
Join Date: Mar 2008
Location: Central Southern Upstate NY

CCM Fan
You mau be able to put it on reversed but it still may not clear the bolt pin, the T2 is pretty short out back. If I still had my T2 I would test it out and see if it fits, if you want I can try to put one on my 6.5 and see if it fits, I think they are the same length out back roughly.
crazyorigin is offline   Reply With Quote
Old 03-08-2011, 07:20 PM   #4 (permalink)
Surfing MCB
 
pakalolo's Avatar
 
Join Date: Mar 2009
Location: NoR CaL

CCM Fan
Palmers Fan
it will not clear the pin, i had to shave my pin to fit the scft
pakalolo is online now   Reply With Quote
Old 03-08-2011, 08:41 PM   #5 (permalink)
Sadist
 
Join Date: Jun 2008
Location: Milwaukee

CCM Fan
AKA Fan
Kilt Fan
You could always contact Mel about being wait listed for one of those cram n jams they make from time to time.
__________________
TheePsycho's Feedback

Quote:
Originally Posted by freebird View Post
lube the shaft and warm the o-ring up in your hand by rubbing it back and forth between hands. then it should go on easier.
TheePsycho is offline   Reply With Quote
Old 03-10-2011, 01:31 PM   #6 (permalink)
MCB Member
 
CCM CHICK's Avatar
 
Join Date: Sep 2007
Location: Far- Nor-Cal

CCM Fan
Quote:
Originally Posted by wilted_bunker View Post
Will a T2 accept an ss-25 stick feed? Will it clear the bolt pin? A friend of mine is willing to sell me his, but he lives about 2 hours away, and we were unable to test it because he didn't have it on him.

Does ccm still produce stock class feeds? Or was that a limited run for the T2?

Thanks.
You a shouldn’t have any issue with the orginal stock feeds we did (SS-25 version) mounting onto a T2 as the hole pattern is the same. It should clear the bolt pin.

We are still making the cram-n-jam stock feeds, we just currently do not have any in stock and there is no firm ETA as to when they will be done and out of production at this time.

I would recommend anyone who is interested to PM me so they can be added to the wait list. There is about 40 people already on it, so I would not lollygag.
__________________
I will be more than happy to answer any CCM related questions, just give me a call!
CCM: 1-877-412-6850
melissa@chipleymachine.com


Quote:
Originally Posted by Bored383 View Post
I don't care what anyone uses to play - just don't be a douche to your fellow players. Its the golden rule.
CCM CHICK is offline   Reply With Quote
Old 03-10-2011, 01:54 PM   #7 (permalink)
.67cal Buwwets!
 
crazyorigin's Avatar
 
Join Date: Mar 2008
Location: Central Southern Upstate NY

CCM Fan
I think he is referring to the CCI made stock feeds for the SS25's, they sit down on the body tight, and actually slide onto the sight rail on the back of the gun. I have a couple, if I have time tonight I will try to put it on my S6.5 reversed to see if it will fit that way, it definetly won't fit in the traditional way w/o modifying the pin. The CCM stock class feeds will definetly clear as Mel said, but you are more apt to find someone selling their child before they sell their CCM stick feed. Hopefully that is what your friend has, but I am guessing its the acrylic/delrin Phantom style feed which are almost the same as the normal Phantom feed they just have another hole drilled in them for mounting.

You may be able to get it to fit facing forward, you will have to get into the Sheridan rock and cock style of shooting. The Cram'n'Jams are really nice, they look great and are a speedy way to reload.

Last edited by crazyorigin; 03-10-2011 at 01:59 PM.
crazyorigin is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 01:56 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC