|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|06-14-2011, 03:54 PM||#1 (permalink)|
Red - Black
Need a measurment or two - for the compairson chart.
I need the length measurement and height measurement of a Series 6 with the following components installed:
CCM Rail (not a drop - just a straight rail)
CCM Mid Rise
CCM Short Pump (3.5 inch delrin portion)
Measure from the top of the Mid Rise to the bottom of the ASA. Try to pull the tape measures as vertical as you can and estimate the height. To the nearest 1/8th inch is fine. Don't pull the tape diagnally.
Pull tape from beaver tail to the front of the pump. Be sure the pump is fully forward.
Also - be sure to note if it is an attached VRA - or a two piece body (VRA is removable).
A few of people doing this will be fine - so - whomever can help - that would be great. It is the only marker I don't currently have in my possession to finish this comparison chart.
Pumpenstein - NSA National Champions
TF's MCB Trust.
|06-14-2011, 09:08 PM||#2 (permalink)|
Hawkeye: Finest Kind
On my S6B:
Bottom of ASA to the top of the feed tube measures horizontally: 9 1/4 inches. I am not sure if mine has a mid-rise. It is pictured here.
Beaver tail to end of the pump: 15.5 inches
|Thread Tools||Search this Thread|