mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCM (http://www.mcarterbrown.com/forums/ccm/)
-   -   CCM Marker Comparison Thread. (http://www.mcarterbrown.com/forums/ccm/165482-ccm-marker-comparison-thread.html)

Talfuchre 06-14-2011 06:21 PM

CCM Marker Comparison Thread.
 
http://i143.photobucket.com/albums/r...T2/Series5.jpg

The picture above is of a Series 5 Basic - but the Series 5 came in different configurations. The weight difference is to reflect the changes over the years to the Series 5. (I will add pictures as I get comparable ones.)

Marker: Series 5
Weight: 2.13 - 3.3 lb
Length: 16 1/2"
Height: 9 1/8"
Body Type: Full
Detent: Single Wire
Hammer: Standard (1.55 oz - 1.250" L)
Valve Type: Cocker
Pump Arm: Single
Feedneck: Angel or CCM Threads
Recommended Input Pressure: Between 300 and 350 PSI
Main Spring: Standard (1.915L)
IVG Tool: 1/8 Allen Key

*All weights and measurements were done with no barrel, a Midrise feedneck, a CCM Straight Rail, and CCM ASA.

Talfuchre 06-14-2011 06:28 PM

http://i143.photobucket.com/albums/r...20T2/SS-25.jpg

SS-25

http://i143.photobucket.com/albums/r...6Prototype.jpg

Series 6 Prototype

Marker: SS 25 or Series 6 Prototype
Weight: 2.9 lb
Length: 16 1/4"
Height: 9 1/4"
Body Type: Mini
Detent: Dual Rubber (Intimidator or Spyder)
Hammer: Standard (1.55 oz - 1.250" L)
Valve Type: Spyder
Pump Arm: Single
Feedneck: Spyder Tabbed Feedneck (One piece early - two piece later)
Recommended Input Pressure: 350 PSI
Main Spring: Standard (1.915L)
IVG Tool: 1/8 Allen Key

*All weights and measurements were done with no barrel, a Midrise feedneck, a CCM Straight Rail, and CCM ASA.

Talfuchre 06-14-2011 06:31 PM

http://i143.photobucket.com/albums/r...T2/Series6.jpg

Marker: Series 6
Weight: 2.9 lb
Length: 15 1/2"
Height: 9 1/4"
Body Type: Full
Detent: Dual Rubber (Intimidator or Spyder)
Hammer: Standard (1.55 oz - 1.250" L)
Valve Type: Cocker
Pump Arm: Single
Feedneck: CCM Threads
Recommended Input Pressure: Between 300 and 350 PSI
Main Spring: Standard (1.915L)
IVG Tool: 1/8 Allen Key

*All weights and measurements were done with no barrel, a Midrise feedneck, a CCM Straight Rail, and CCM ASA.

Talfuchre 06-14-2011 06:31 PM

http://i143.photobucket.com/albums/r...CM%20T2/T2.jpg

Marker: T2
Weight: 2.3 lb
Length: 13" (?)
Height: 9 1/4" (?)
Body Type: Half Block Modular
Detent: Single Rubber (Intimidator or Spyder)
Hammer: Mid Block (1.65 oz - 1.675" L)
Valve Type: Cocker
Pump Arm: Dual
Feedneck: Spyder Tabbed
Recommended Input Pressure: Between 300 and 350 PSI
Main Spring: Soft (1.975 L)
IVG Tool: 3/8 Allen Key

*All weights and measurements were done with no barrel, a Midrise feedneck, a CCM Straight Rail, and CCM ASA.


The T2 has a modular body that allows for Right, Center, or Left Feed bodies as well as a Sizer Body. For an excellent explanation of this please see Spoon's awesome thread HERE.

Talfuchre 06-14-2011 06:46 PM

http://i143.photobucket.com/albums/r...2/Series65.jpg

Marker: Series 6.5
Weight: 2.4 lb
Length: 13" (?)
Height: 9 3/8" (?)
Body Type: Half Block
Detent: Dual Rubber (Intimidator or Spyder)
Hammer: Mid Block (1.65 oz - 1.675" L)
Valve Type: Cocker
Pump Arm: Single
Feedneck: Spyder Tabbed
Recommended Input Pressure: Between 300 and 350 PSI
Main Spring: Soft (1.975 L)
IVG Tool: 3/8 Allen Key

*All weights and measurements were done with no barrel, a Midrise feedneck, a CCM Straight Rail, and CCM ASA.


All times are GMT -4. The time now is 06:22 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC