Ss25 problem

owenator · 01-22-2012, 10:04 PM

I just got my ss25 aired up and it leaked down the barrel, so I stepped up the reg pressure and it still leaked. Any ideas on what's going on?

Feyd · 01-22-2012, 10:14 PM

Check the reg pressure shouldn't be more than 350 on a SS-25 if I remember correctly. I ran mine at 330 PSI. At worst it's a face seal. Feyd............

owenator · 01-22-2012, 10:32 PM

Ok, thanks.

shredxcam · 01-22-2012, 10:49 PM

I set mine around 380. Check to see if the poppit o ring is on good. Mine halfway blew off last week

Talfuchre · 01-23-2012, 11:50 AM

I hate to ask this - but you did pump it before you aired it up right?

TF

Feyd · 01-23-2012, 04:34 PM

Wow 380! Ya I remember mine would just vent down the barrel after 350! I think I meant popit as well. I haven't spoken english in years! LOL, Feyd...............

owenator · 01-23-2012, 05:36 PM

Yes, I did pump it before airing it up. So what o-ring am I going to have to replace?

B.R. · 01-23-2012, 05:48 PM

this was my marker, (im sorry this is happenning)
i dont think its a matter of needing anything replaced as it worked a couple weeks ago here.
my geuss reg pressure.
did you adjust velocity at all?

Feyd · 01-23-2012, 06:59 PM

BR is the new owner in a hot climate? I ran into this once. You send a gun to a hot part of the country and the O rings shrink. The O-ring in the valve is usually the culprit in this case if it is not the reg. Feyd............

B.R. · 01-23-2012, 07:08 PM

no hes in washington state.
sort of related to what youre saying, last winter when it was real cold and i got a typhoon back from a rebuild at palmers. it leaked a LOT.
i called and talked to craig and he was confused but said to let it warm up maybe.
i let it sit inside a while and from riding on the truck in freezing weather i geuss the o-rings harden...

01-22-2012, 10:14 PM	#2 (permalink)
Feyd Olde Basterd#2 Join Date: Oct 2008 Location: Combat Zone club 66	Check the reg pressure shouldn't be more than 350 on a SS-25 if I remember correctly. I ran mine at 330 PSI. At worst it's a face seal. Feyd............ __________________

01-23-2012, 11:50 AM	#5 (permalink)
Talfuchre Unharshed Mellow Join Date: May 2006	I hate to ask this - but you did pump it before you aired it up right? TF __________________ Pumpenstein - NSA National Champions TF's MCB Trust.

01-23-2012, 04:34 PM	#6 (permalink)
Feyd Olde Basterd#2 Join Date: Oct 2008 Location: Combat Zone club 66	Wow 380! Ya I remember mine would just vent down the barrel after 350! I think I meant popit as well. I haven't spoken english in years! LOL, Feyd............... __________________

01-23-2012, 05:48 PM	#8 (permalink)
B.R. THE NEW PA Join Date: Nov 2010 Location: ne Pa	this was my marker, (im sorry this is happenning) i dont think its a matter of needing anything replaced as it worked a couple weeks ago here. my geuss reg pressure. did you adjust velocity at all? __________________ FEEDBACK http://www.mcarterbrown.com/forums/f...-feedback.html this big tranformer came through a town like 30 miles from my hometown!!

01-23-2012, 06:59 PM	#9 (permalink)
Feyd Olde Basterd#2 Join Date: Oct 2008 Location: Combat Zone club 66	BR is the new owner in a hot climate? I ran into this once. You send a gun to a hot part of the country and the O rings shrink. The O-ring in the valve is usually the culprit in this case if it is not the reg. Feyd............ __________________

01-22-2012, 10:49 PM	#4 (permalink)
shredxcam Active Member Join Date: Feb 2009	I set mine around 380. Check to see if the poppit o ring is on good. Mine halfway blew off last week

01-23-2012, 07:08 PM	#10 (permalink)
B.R. THE NEW PA Join Date: Nov 2010 Location: ne Pa	no hes in washington state. sort of related to what youre saying, last winter when it was real cold and i got a typhoon back from a rebuild at palmers. it leaked a LOT. i called and talked to craig and he was confused but said to let it warm up maybe. i let it sit inside a while and from riding on the truck in freezing weather i geuss the o-rings harden... __________________ FEEDBACK http://www.mcarterbrown.com/forums/f...-feedback.html this big tranformer came through a town like 30 miles from my hometown!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search