mcarterbrown.com  

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 02-09-2012, 09:31 AM   #1 (permalink)
Sadist
 
Join Date: Jun 2008
Location: Milwaukee

CCM Fan
AKA Fan
Kilt Fan
Recommendations for polishing

Probably not the proper area to post this but oh well, I have some parts for my T2 that I want to get polished. I would do it myself but I really don't have the time between working and the 1 year old and the wife. Does anyone know of anyone that does polishing or they do polishing themselves? I just want my pump rod, pump arms and sear polished.
__________________
TheePsycho's Feedback

Quote:
Originally Posted by freebird View Post
lube the shaft and warm the o-ring up in your hand by rubbing it back and forth between hands. then it should go on easier.
TheePsycho is offline   Reply With Quote
Old 02-09-2012, 09:35 AM   #2 (permalink)
Brass Mafia Wannabe
 
Join Date: Sep 2010
Location: Oh Hi Oh

im sure tf will be posting in on this, but the polishing itself doesnt take that long. i think tf said he only spent a few minutes and was done.
__________________
Quote:
Originally Posted by Floundah View Post
Now that's something worth fundraising for, an MCB zombie defense fort. With indoor fields. And blackjack. And hookers.
Leave me some feedback if you've dealt with me:
http://www.mcarterbrown.com/forums/f...-feedback.html
artguy63 is offline   Reply With Quote
Old 02-09-2012, 09:39 AM   #3 (permalink)
Sadist
 
Join Date: Jun 2008
Location: Milwaukee

CCM Fan
AKA Fan
Kilt Fan
Well the pump arms might need a little wet sanding as well as they got a little marred up when I removed them in one spot.
__________________
TheePsycho's Feedback

Quote:
Originally Posted by freebird View Post
lube the shaft and warm the o-ring up in your hand by rubbing it back and forth between hands. then it should go on easier.
TheePsycho is offline   Reply With Quote
Old 02-09-2012, 10:30 AM   #4 (permalink)
suns out guns out
 
freebird's Avatar
 
Join Date: Jun 2008
Location: upstate NY
Send a message via AIM to freebird

CCM Fan
might as well get your hammer polished while your at it
__________________
Quote:
Originally Posted by John Wayne View Post
If you've got them by the balls their hearts and minds will follow.
TEAM CAPTAIN - UPSTATE HATE
HORNETS NEST PAINTBALL
MCB Feedback
AO Feedback

Hillbilly death machine.
Fuel'd by Diesel fuel, Miller High Life, Gunpowder, and Red Meat.
freebird is offline   Reply With Quote
Old 02-09-2012, 10:52 AM   #5 (permalink)
Sadist
 
Join Date: Jun 2008
Location: Milwaukee

CCM Fan
AKA Fan
Kilt Fan
Yeah forgot about the hammer.
__________________
TheePsycho's Feedback

Quote:
Originally Posted by freebird View Post
lube the shaft and warm the o-ring up in your hand by rubbing it back and forth between hands. then it should go on easier.
TheePsycho is offline   Reply With Quote
Old 02-09-2012, 01:00 PM   #6 (permalink)
Red - Black
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Hammer - Arms, pump guide rod.

THat is it.

Borrow a buffer (a bench grinder with a buffing wheel - or even a small buffing wheel on a Dremel - and some rouge (Jewlers rouge would be fine) and make it shiny.

I have a buffing wheel - and it takes me literally 30 seconds to do this.

If you don't have the set up - it isn't NECESSARY. If you don't have the time for 30 seconds - sell your marker and hang out with your kid.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 02-09-2012, 01:18 PM   #7 (permalink)
Sadist
 
Join Date: Jun 2008
Location: Milwaukee

CCM Fan
AKA Fan
Kilt Fan
Well the problem is my wife loves to yell at me if I'm doing anything other than hanging out with her or the kid. My wife tries to be very controlling.

Buffing wheel and jewelers rouge won't take out needle nose tool marks will it? Some fine wet sanding would be needed correct?

Can you pick up jewelers rouge at Home Depot?
__________________
TheePsycho's Feedback

Quote:
Originally Posted by freebird View Post
lube the shaft and warm the o-ring up in your hand by rubbing it back and forth between hands. then it should go on easier.

Last edited by TheePsycho; 02-09-2012 at 01:22 PM.
TheePsycho is offline   Reply With Quote
Old 02-09-2012, 01:42 PM   #8 (permalink)
Brass Mafia Wannabe
 
Join Date: Sep 2010
Location: Oh Hi Oh

Quote:
Originally Posted by TheePsycho View Post
Well the problem is my wife loves to yell at me if I'm doing anything other than hanging out with her or the kid. My wife tries to be very controlling.

Buffing wheel and jewelers rouge won't take out needle nose tool marks will it? Some fine wet sanding would be needed correct?

Can you pick up jewelers rouge at Home Depot?
tries to be, or succeeds?

haha sorry man, just kidding
__________________
Quote:
Originally Posted by Floundah View Post
Now that's something worth fundraising for, an MCB zombie defense fort. With indoor fields. And blackjack. And hookers.
Leave me some feedback if you've dealt with me:
http://www.mcarterbrown.com/forums/f...-feedback.html
artguy63 is offline   Reply With Quote
Old 02-09-2012, 01:57 PM   #9 (permalink)
Sadist
 
Join Date: Jun 2008
Location: Milwaukee

CCM Fan
AKA Fan
Kilt Fan
Depends on how much grief I want to deal with.
__________________
TheePsycho's Feedback

Quote:
Originally Posted by freebird View Post
lube the shaft and warm the o-ring up in your hand by rubbing it back and forth between hands. then it should go on easier.
TheePsycho is offline   Reply With Quote
Old 02-09-2012, 02:31 PM   #10 (permalink)
Red - Black
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Yup - wet dry sandpaper - starting at 800 or so - up to 1000 should be fine enough to get out those scratches.

Then go to the polishing wheel.

Yes rogue can be found at home depot. Just find some made for stainless - or jewlers.

The fine grit wet dry can be found at auto parts places or GOOD hardware stores.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 04:05 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC