|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|05-09-2012, 12:58 AM||#1 (permalink)|
Join Date: Apr 2006
Location: Vancouver, BC
CCM reg creeping
Hey folks, my CCM reg is creeping. Is this just a relube and clean type fix, or should I be looking at buying parts?
Just want to know, before I get into building pressure testers and taking the thing apart.
|05-09-2012, 04:03 AM||#2 (permalink)|
Join Date: Feb 2008
Location: BC, Canada
Take apart both your topworks and bottomworks; inspect orings, clean and relube.
We were suggested by CCM to use synthetic grease and so far it's been working great. If it's still causing you problems we can take a look at it the next time we meet up.
|05-09-2012, 08:15 AM||#3 (permalink)|
Red - Black
Replace the small top oring. It has lost its durometer - and is letting the pressure creep by. Cleaning will do little - but do that too.
Repack with Hater Sauce Marmalade - leave the top o-ring dry.
Pumpenstein - NSA National Champions
TF's MCB Trust.
|05-09-2012, 06:28 PM||#4 (permalink)|
Ya i had this happening to my reg along with other symptoms, it was the piston o-ring in the bottom half of the reg. Wasnt even worn just needed to be cleaned and re-lubed in my case
|Thread Tools||Search this Thread|