mcarterbrown.com  

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 06-06-2012, 03:15 PM   #1 (permalink)
I am a parts whore!
 
spudman's Avatar
 
Join Date: Apr 2010
Location: Ogden, UT
Send a message via Skype™ to spudman

CCM Fan
Undertravel screw stuck in frame?

So I had a new style'd 86 frame i sold to a another greenie and the Undertravel screw is stuck. It won't budge. So far we've tried soaking it in wd 40 overnight... No luck. My next thought would be to use heat or cold to get some wiggle room. I want to freeze it to get the SS screw to contract more than the aluminum frame or do i have it backwards and need heat?



Does anyone know if it gets locktight during assembly?



Kinda at a loss for ideas. I never thought to check that little screw as it fired fine and was plenty snappy on the trigger pull when i tested it.

Figured I'd pick your brains before i called CCM.





One on bottom right for reference...



Last edited by spudman; 06-07-2012 at 03:27 AM.
spudman is offline   Reply With Quote
Old 06-06-2012, 03:36 PM   #2 (permalink)
MCB Member
 
Join Date: Oct 2007

CCM Fan
They are blue loctite in place. It should move pretty easy.Turn clockwise to adjust.

It will not come out the bottom.So if you are trying to take it out it wont work.

Also your grip frame screw is on wrong. Those are hidden screws.
__________________
“Do not yearn too much for a sword made by a famous smith. This is because even if you give a good man a sword worth ten thousand coppers, he will not be able to beat a hundred men each holding a spear worth a hundred coppers.” - Asakura Takakage Toshikage, 1462-1482

Ecc. 9-10
Whatever your hand finds to do, do it with your might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave, where you go.

NEW STORE http://store.chipleymachine.com/

DOOR GUNNER handgun mounts for gunsafes.

http://www.machineshopdpm.com/
CCMachinist is offline   Reply With Quote
Old 06-06-2012, 05:24 PM   #3 (permalink)
Brass Mafia Wannabe
 
Join Date: Sep 2010
Location: Oh Hi Oh

just for reference, even though bill helped you already, you want to HEAT loctite.

boiling water, hair dryer, heat gun, blowtorch... whatever works.
__________________
Quote:
Originally Posted by Floundah View Post
Now that's something worth fundraising for, an MCB zombie defense fort. With indoor fields. And blackjack. And hookers.
Leave me some feedback if you've dealt with me:
http://www.mcarterbrown.com/forums/f...-feedback.html
artguy63 is offline   Reply With Quote
Old 06-06-2012, 05:51 PM   #4 (permalink)
I am a parts whore!
 
spudman's Avatar
 
Join Date: Apr 2010
Location: Ogden, UT
Send a message via Skype™ to spudman

CCM Fan
Sweet thanks guys! I'll get a hold of him and see what we can figure out.


*The pic was something i found off Tf's site in case i had the name wrong...
spudman is offline   Reply With Quote
Old 06-06-2012, 10:52 PM   #5 (permalink)
Red
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Bill,

That picture is from my blog and is from a Series 5 Basic. They didn't have hidden screws - remember?

Man - you ARE getting old?


I am just playin' with you old man.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 06-07-2012, 04:09 PM   #6 (permalink)
MCB Member
 
i-bunker-u's Avatar
 
Join Date: Dec 2010
Location: Ontario Canada

I have tried freezing it and boiling it ... Still won't budge. any other ideas?
__________________
Current Sales




I live in Canada but have a USA address as well
i-bunker-u is offline   Reply With Quote
Old 06-07-2012, 04:20 PM   #7 (permalink)
Active Member
 
Join Date: Mar 2009
Location: Honolulu, Hawaii

Just to be sure. Which way are you turning the under-travel screw? Clock-wise or counter-clockwise? Just wanted to bring to attention again that the screw will need to be turned clock-wise to exit the frame through the top of the grip frame. It will not come out through the bottom. Good luck.
SeuDog is offline   Reply With Quote
Old 06-07-2012, 04:39 PM   #8 (permalink)
MCB Member
 
Join Date: Oct 2007

CCM Fan
Can you pull the trigger?

Just a thought.

Maybe its squishing the trigger.
__________________
“Do not yearn too much for a sword made by a famous smith. This is because even if you give a good man a sword worth ten thousand coppers, he will not be able to beat a hundred men each holding a spear worth a hundred coppers.” - Asakura Takakage Toshikage, 1462-1482

Ecc. 9-10
Whatever your hand finds to do, do it with your might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave, where you go.

NEW STORE http://store.chipleymachine.com/

DOOR GUNNER handgun mounts for gunsafes.

http://www.machineshopdpm.com/
CCMachinist is offline   Reply With Quote
Old 06-11-2012, 01:28 PM   #9 (permalink)
MCB Member
 
i-bunker-u's Avatar
 
Join Date: Dec 2010
Location: Ontario Canada

yes i am screwing it the correct direction and the screw is all the way backed out.
__________________
Current Sales




I live in Canada but have a USA address as well
i-bunker-u is offline   Reply With Quote
Old 06-11-2012, 02:02 PM   #10 (permalink)
mag shooter
 
superman's Avatar
 
Join Date: Jun 2007
Location: Charleston, SC

Quote:
Originally Posted by CCMachinist View Post
They are blue loctite in place. It should move pretty easy.Turn clockwise to adjust.

It will not come out the bottom.So if you are trying to take it out it wont work.
you might want to reread this. it wont come out the bottom
__________________
I buy Automags and Parts: if you need cash shoot me a pm

feedback(http://www.mcarterbrown.com/forums/f...-feedback.html)
superman is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 03:41 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC