|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|06-08-2012, 06:35 PM||#11 (permalink)|
Red - Black
The frame you have was made for a ball and spring that entered the hole in the frame and was used with a different Cam.
You need a different cam and a small ball and spring to use this frame.
You have the cam for a pin and the frame for a spring and ball - you need to switch one or the other to make it work
The easier way is to buy a shoulder bolt to attach the AT arm to the pump arm and leave it alone.
Pumpenstein - NSA National Champions
TF's MCB Trust.
Last edited by Talfuchre; 06-08-2012 at 06:46 PM.
|Thread Tools||Search this Thread|