mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCM (http://www.mcarterbrown.com/forums/ccm/)
-   -   drilled guide rod (http://www.mcarterbrown.com/forums/ccm/205489-drilled-guide-rod.html)

CCMachinist 06-14-2012 06:08 PM

drilled guide rod
 
ONLY 1 LEFT


We drilled out a couple guide rods to see what they are like.

These fit the T2 ,S6, 6.5, J2-L.

They weigh just under 1oz. or almost half the weight of a solid rod.

yes they would add some air volume.

We only made 10.

If anybody wants one contact me here.

$30 shipped.

http://machineshopdpm.com/webphotos/holorod-1.JPG


Yes you can bend them. This took a 12" cheater bar and some effort. It's really just tubing at this point.

http://machineshopdpm.com/webphotos/holorod-2.JPG

patfl1 06-14-2012 06:09 PM

I'll take one

Methodcaptain 06-14-2012 06:14 PM

I'll take one as well. I sent you a PM

shaggy13 06-14-2012 08:39 PM

I'll take one

bracer028 06-14-2012 10:03 PM

drilled my vlm same way...

This will give you 20+ fps gain.

shredxcam 06-15-2012 09:12 AM

Eek. I'll stick with a solid one cuz I'm sure I'd fold It in half like yours

toofless916 06-15-2012 11:56 AM

I'll take one!

FiXeL 06-15-2012 12:00 PM

I did this mod for my double barreled T2, and i did leave a bit more wall thickness than these babies, but it is stainless steel, and hard to bend either way. Awesome that CCM offers these, get them while they last!

CCMachinist 06-15-2012 01:38 PM

Quote:

Originally Posted by FiXeL (Post 2380297)
I did this mod for my double barreled T2, and i did leave a bit more wall thickness than these babies, but it is stainless steel, and hard to bend either way. Awesome that CCM offers these, get them while they last!

You are correct in the rods being strong. It took some real effort to bend this one. I'm guessing if someone bends this rod they will have other gun issues.

We have seen some real damage to guns but it wasn't due to playing.

shredxcam 06-15-2012 02:59 PM

Quote:

Originally Posted by FiXeL (Post 2380297)
I did this mod for my double barreled T2, and i did leave a bit more wall thickness than these babies, but it is stainless steel, and hard to bend either way. Awesome that CCM offers these, get them while they last!

I've seen pump rods snap and those are stainless. Im not taking any chances


All times are GMT -4. The time now is 06:13 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC