mcarterbrown.com  

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 07-02-2012, 11:16 PM   #1 (permalink)
The Attractive Fireman
 
TippmannFireman's Avatar
 
Join Date: Sep 2009
Location: Chattanooga, TN

CCM Fan
Brass N Wood Fan
CCM A/T help?

So, I have a CCM 86* thin frame, and a CCM A/T that I want to put together to make heaven on earth. I've read stuff about CCM frames having pins, or a ball+spring combo kinda like a Sheridan or old Autococker frame, but I have no idea what I need exactly. Here's what I have.







So, what do I need/need to do to make this work? Sorry if this is an extremely stupid question, but I'm new to CCM's/CCM parts.

Also, sorry for all the dust.
__________________
Quote:
Originally Posted by Mar View Post
I have a hot sister. looks just like me in a wig. but it isn't me, really, just keep your hands above the belt and you'll never know.
Feedback:
TippmannFireman is offline   Reply With Quote
Old 07-02-2012, 11:23 PM   #2 (permalink)
Active Member
 
canuckistani's Avatar
 
Join Date: Jun 2011
Location: Happy Valley, Utah

CCM Fan
When you put the AT arm in place, there's a tiny pin that drops in the little hole at the top of the frame. That's what keeps it in place. Other than that, the AT arm should hook up to the pump guide rod and that's about it.
canuckistani is offline   Reply With Quote
Old 07-02-2012, 11:51 PM   #3 (permalink)
MCB Member
 
Join Date: Oct 2007

CCM Fan
you need this screw only. no pins, no spring and ball.Your cam doesn't have a groove for the ball anyway. The screw will hold in the cam .The screw goes thru the lever into the pump rod and keeps the cam from coming out

CCM AT Cam/Lever/Screw Set - Pol Black - 7B0003 | eBay
__________________
“Do not yearn too much for a sword made by a famous smith. This is because even if you give a good man a sword worth ten thousand coppers, he will not be able to beat a hundred men each holding a spear worth a hundred coppers.” - Asakura Takakage Toshikage, 1462-1482

Ecc. 9-10
Whatever your hand finds to do, do it with your might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave, where you go.

NEW STORE http://store.chipleymachine.com/

DOOR GUNNER handgun mounts for gunsafes.

http://www.machineshopdpm.com/
CCMachinist is offline   Reply With Quote
Old 07-03-2012, 12:26 AM   #4 (permalink)
The Attractive Fireman
 
TippmannFireman's Avatar
 
Join Date: Sep 2009
Location: Chattanooga, TN

CCM Fan
Brass N Wood Fan
I have the screw that goes into the pump rod. I'm sending the rod to jcurt tomorrow to have it drilled and tapped for it. I just have read stuff about pins and ball and springs, so I didn't know what mine needed. Thanks!
__________________
Quote:
Originally Posted by Mar View Post
I have a hot sister. looks just like me in a wig. but it isn't me, really, just keep your hands above the belt and you'll never know.
Feedback:
TippmannFireman is offline   Reply With Quote
Old 07-03-2012, 07:04 AM   #5 (permalink)
Red
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
If you really wanted the right cam - you would need to get a grooved cam to accept the ball and spring.

What Bill is saying is the Pump arm Screw will not allow the cam and arm assembly to come out when leaning it to the left.

Also - follow my manual and properly adjust the under travel screw. You will be fine.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 03:10 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC