The New CCM Sniper Rifle Thread: The story so far - Page 95

The $aint · 02-19-2013, 05:38 PM

Looks good on it Bill, for years I've been trying to tell people about them,but the price tag makes them think its snake oil. And none of those people would ever take the time to shoot one oh well..
I'd use it if I didn't have anything to do with them regardless. It's a good barrel.
Right now I'm useing a 14 inch cocker thread and love it. And when I put any other cocker barrel on it my FSR gets way out of adjustment cause of the lack of accuracy.

dundadun · 02-19-2013, 06:31 PM

So that isn't just a stock endgame barrel right?

SpinDoctor15 · 02-20-2013, 01:15 AM

Quote:

Originally Posted by CCMachinist

Here is our first shots with the $aints Endgame barrel.

These were shot off-hand in the kneeling position using a Lucid red dot scope.

The first shot was right above the board.

We were shooting 70 yards. The FPS was 270 using 12 grams

The three shots in the lower right corner was 80 yards .

This has been the most accurate barrel I have shot on my SR1

http://machineshopdpm.com/webphotos/target-001.JPG

Bill, what kind of paint were you shooting? Have you done comparison testing with typical paint vs first strike?

Trinity · 02-20-2013, 03:30 AM

Bill is shooting at 70 and 80 yards. It can only be first strikes at those ranges. No round paint could come close to those groups at those kinds if distances. I have to say that at 75 yards my 14" Hammerhead shoots very similar size groups. The SR1 is deadly at those ranges.

CCMachinist · 02-20-2013, 08:54 AM

Quote:

Originally Posted by SpinDoctor15

Bill, what kind of paint were you shooting? Have you done comparison testing with typical paint vs first strike?

We were shooting FS.

Trinity is right.We have never got paint to shoot that consistent.At 70 yards.

My best consistency with paint has been at 45 yards.

I have hit the target at 70 and 80 yards with paint but not shot to shot.

FS is a real joy to shoot. It puts a grin on your face.

The Flounder · 02-20-2013, 09:23 AM

Quote:

Originally Posted by CCMachinist

FS is a real joy to shoot. It puts a grin on your face.

And a belly shaking laugh when they cannot believe you hit them from that far away!

The $aint · 02-20-2013, 09:49 AM

Quote:

Originally Posted by SpinDoctor15

Bill, what kind of paint were you shooting? Have you done comparison testing with typical paint vs first strike?

The regular 10 &14 inch barrel has been out for over 12 years.
Second testing is not needed, only two of these 21 inch ones were ever made and both are mine. And at $400 each no more will be made. Sorry

SpinDoctor15 · 02-21-2013, 12:38 AM

Quote:

Originally Posted by CCMachinist

We were shooting FS.

Trinity is right.We have never got paint to shoot that consistent.At 70 yards.

My best consistency with paint has been at 45 yards.

I have hit the target at 70 and 80 yards with paint but not shot to shot.

FS is a real joy to shoot. It puts a grin on your face.

Excellent points. I just got to thinking how 70 yards is nearly 3/4 the length of a football field... Pretty impressive results you have once you understand the perspective!

CCMachinist · 03-05-2013, 04:53 PM

Here is my getto FS tube. I haven't seen the pez tube but I suspect they are pretty close.

I just checked out Dukie's pez feed tube. Mine is the same concept. Mine will be just for the SR1. More of a custom build .

This is spring loaded.You just can't see the spring very clear.

I just went outside an tried it.Works pretty good.

The pics pretty much speak for themselves.

For a custom build I was thinking an aluminium tube that fits a scope ring that would fit the picatinny rail on the foregrip? Pretty simple. I'v got a couple of ideas that would help load the tube a little faster. This one is 15 shot.

casper · 03-05-2013, 05:17 PM

You go Bill !! Who needs mag feed when you can do tube feed!!

02-19-2013, 05:38 PM	#941 (permalink)
The $aint Delta paintball team Join Date: Jan 2010 Location: The back woods of NJ	Looks good on it Bill, for years I've been trying to tell people about them,but the price tag makes them think its snake oil. And none of those people would ever take the time to shoot one oh well.. I'd use it if I didn't have anything to do with them regardless. It's a good barrel. Right now I'm useing a 14 inch cocker thread and love it. And when I put any other cocker barrel on it my FSR gets way out of adjustment cause of the lack of accuracy. __________________ Generously Sponsored By: Valken\|GoG Paintball \|ScenarioSuperstore.com\|FogTech Follow us: http://twitter.com/DeltaPaintball

02-19-2013, 06:31 PM	#942 (permalink)
dundadun Boom. Yummy Join Date: Jul 2007 Location: SoCal	So that isn't just a stock endgame barrel right? __________________ __________________ Pirate Intimidator and the Most Comfortable Gun Ever Dukie Lever Gun and now Smiley-ized Feedback For sale: k Stock and Random bits for sale as well as items I want to buy!

02-20-2013, 03:30 AM	#944 (permalink)
Trinity Rec Poster Join Date: May 2008 Location: Eureka, California	Bill is shooting at 70 and 80 yards. It can only be first strikes at those ranges. No round paint could come close to those groups at those kinds if distances. I have to say that at 75 yards my 14" Hammerhead shoots very similar size groups. The SR1 is deadly at those ranges. __________________ http://trinity-tangodown.blogspot.com/

03-05-2013, 04:53 PM	#949 (permalink)
CCMachinist MCB Member Join Date: Oct 2007	getto FS tube Here is my getto FS tube. I haven't seen the pez tube but I suspect they are pretty close. I just checked out Dukie's pez feed tube. Mine is the same concept. Mine will be just for the SR1. More of a custom build . This is spring loaded.You just can't see the spring very clear. I just went outside an tried it.Works pretty good. The pics pretty much speak for themselves. For a custom build I was thinking an aluminium tube that fits a scope ring that would fit the picatinny rail on the foregrip? Pretty simple. I'v got a couple of ideas that would help load the tube a little faster. This one is 15 shot. __________________ Stolen from uv halo Quote: Originally Posted by Tom Kaye -in response to FS price critics Unfortunately all of you have played the one "speedball" game of paintball for so long you can't conceive of other ways to do this and hence any new ideas seem stupid. “Do not yearn too much for a sword made by a famous smith. This is because even if you give a good man a sword worth ten thousand coppers, he will not be able to beat a hundred men each holding a spear worth a hundred coppers.” - Asakura Takakage Toshikage, 1462-1482 Ecc. 9-10 Whatever your hand finds to do, do it with your might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave, where you go. Last edited by CCMachinist; 03-05-2013 at 05:03 PM.

03-05-2013, 05:17 PM	#950 (permalink)
casper MCB Member Join Date: Apr 2007 Location: Waterford,Nor Cal	You go Bill !! Who needs mag feed when you can do tube feed!! __________________ My feedback http://www.mcarterbrown.com/forums/f...-feedback.html Check out the new West Coast Adventure Park the old Infinite edge!!! http://www.youtube.com/watch?v=thy8_jG-f1s socaleuro's old school jersey review http://www.mcarterbrown.com/forums/m...socaleuro.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search