|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|08-18-2012, 05:26 PM||#71 (permalink)|
Official LL5 Dolphin-Dive
It depends on the area. I don't really have problems, but Jackson PD is too busy chasing all the over-flow hooligans coming out of Lakewood to worry about paintball. I sure as hell wouldn't be parading the SR1 around out in the open at my apartment complex but if you have your own yard you're fine.
|08-18-2012, 07:45 PM||#72 (permalink)|
Join Date: May 2008
Location: Eureka, California
This is the kind of quality that makes me love using this rifle. I have been testing the SR1 prototype and found that when wearing gloves that often are wet (rain or sweat) and muddy from crawling through the dirt my hands wanted a slightly larger knob on the bolt handle. That's especially true because as a lefty using a left-handed bolt the breach and handle are on the other side of the rifle from my eyes. I talked to Bill about the knob for my own gun (which I just picked up) and he said he made the stock knob to fit the proportions of the gun, but that he would try something a bit bigger. I expressed a bit of concern over the glint from the shiny metal on the bolt handle and he also bead-blasted that.
Here is the product:
How beautiful is that? CCM has someone on staff who does engraving so I just had to take advantage of that too.
Here is a comparison of the stock bolt against the one Bill put on my rifle:
And finally to give you a better idea of what the bolts like like when inside the gun a photo of the stock on the right and mine on the left. If they look like reversed images, that's because one is a left-handed bolt and one is a right-handed bolt.
|08-18-2012, 11:06 PM||#76 (permalink)|
I let him borrow mine until I got his built.
“Do not yearn too much for a sword made by a famous smith. This is because even if you give a good man a sword worth ten thousand coppers, he will not be able to beat a hundred men each holding a spear worth a hundred coppers.” - Asakura Takakage Toshikage, 1462-1482
Whatever your hand finds to do, do it with your might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave, where you go.
NEW STORE http://store.chipleymachine.com/
DOOR GUNNER handgun mounts for gunsafes.
|08-18-2012, 11:20 PM||#77 (permalink)|
Facta Non Verba
I kinda like the big handle. I need to grab a stock wrench so I can properly tighten this bad boy down. Also need to do some testing soon, I have a case of FS en route but I need to order up some bulk lelands as well.
I'm also working on getting a field chrono so I can test properly.
|08-20-2012, 09:41 AM||#79 (permalink)|
One in the Pipe!
I've got some new parts to share......
Damn gotta go to work!
|Thread Tools||Search this Thread|