mcarterbrown.com  

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 09-13-2012, 09:56 PM   #1 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

Auto trigger question.

I bought 2 auto triggers recently the first one I put on my superbolt with a CCM 45 frame. works great. now the second one

I am installing it on another gun with a slim frame. now here is the problem it seams that when the cam is in the fire position the arm is maybe 30 deg too far counter clockwise. I pushed forward with the install and I did get it to work but the trigger seams WAY WAY too sensitive.

So here is the question. is there any way to adjust the position of the cam relative to the arm angle.
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."

http://www.tjdcustomhobbies.com
tjd10684 is offline   Reply With Quote
Old 09-13-2012, 10:45 PM   #2 (permalink)
Red - Black
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
You may have the wrong cam for the frame. You may have an 86 degree cam for a .45 frame.

Do they both look the same when you take them both out?

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 09-13-2012, 11:34 PM   #3 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

they look exactly the same. I did some swapping around tests.
trigger frame / auto trigger / result
gloss / gloss / fail
gloss / dust / fail
dust / dust / work
dust / gloss / work

I also repeated this test swapping bodies with the results being the same. if I use the gloss slim frame with any auto trigger kit on any gun it fails the dust frame with any auto trigger on any body works. it does not look like the holes in the frame are different and short of sticking them both on the mill and comparing the coordinates of the holes I would not be able to tell. the only thing I have not looked at or swapped is the triggers. In theory if the trigger was just a little bit too thick where the auto trigger kit contact it it could impede the action of the trigger. Has anybody else had this problem?

here are some pictures of the issue

This is the firing position of the non working frame / autotrigger combo


this is the firing position of the working frame / autotrigger combo


if you disconnect the auto trigger pin and let the auto trigger go where it "wants" to be when the trigger is pulled.


__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."

http://www.tjdcustomhobbies.com
tjd10684 is offline   Reply With Quote
Old 09-14-2012, 06:23 AM   #4 (permalink)
Red - Black
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
What pump is on these - are the pump arms the same length - is the hole drilled in the same spot?

You can actually reverse a CCM pump arm and change where the AT hole lines up. There are not drilled in the middle.

Take a look at that - could it be the pump arm?

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 09-14-2012, 09:19 AM   #5 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

The seams to have fixed it. That was pretty dumb of me thanks for the help.
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."

http://www.tjdcustomhobbies.com
tjd10684 is offline   Reply With Quote
Old 09-14-2012, 10:28 AM   #6 (permalink)
Red - Black
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
DUDE!

That is NOT DUMB. I sat and stared at a CCM once for about 11 hours because I couldn't figure it out.

It is such a little difference that I had to take a measuring tape to mine to figure it out.

Glad it helped - and mostly - glad you are back in pumping business.

Now take some pics of those bad boys and post them up!!!

TF





now.... having a penguins logo in a CCM forum.... not smart... Mel may ban you for not supporting her Sharks!!!!
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 09-14-2012, 08:51 PM   #7 (permalink)
MCB Member
 
tjd10684's Avatar
 
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)

Hopefully Mel will forgive me since were in different conferences

Here they are both in working order just in time for the weekend!



Thanks again.
__________________
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817

A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."

http://www.tjdcustomhobbies.com
tjd10684 is offline   Reply With Quote
Old 09-14-2012, 11:14 PM   #8 (permalink)
Red - Black
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
No problem bro - I take payments in Carbon Fiber Pump kits...


TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 04:19 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC