mcarterbrown.com
 

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 10-01-2012, 10:29 PM   #11 (permalink)
Total wreath
 
Join Date: Feb 2009
Location: Las Vegas

CCM Fan
No. It takes any 2k plus pump kit or front block.
I put a wgp kit on mine to see if it fit
shredxcam is offline   Reply With Quote
Old 10-01-2012, 10:30 PM   #12 (permalink)
Total wreath
 
Join Date: Feb 2009
Location: Las Vegas

CCM Fan
shredxcam is offline   Reply With Quote
Old 10-01-2012, 10:45 PM   #13 (permalink)
.67cal Buwwets!
 
crazyorigin's Avatar
 
Join Date: Mar 2008
Location: Central Southern Upstate NY

CCM Fan
The main pump guide rod threads out of the vertical air adaptor? I have never tried to remove that part, never needed to on the 2 i have had. I did not know this.
crazyorigin is offline   Reply With Quote
Old 10-01-2012, 10:47 PM   #14 (permalink)
Total wreath
 
Join Date: Feb 2009
Location: Las Vegas

CCM Fan
Well I only know be cause the vasa on mine is stuck. The screw that holds it on is rusted solid
shredxcam is offline   Reply With Quote
Old 10-02-2012, 01:25 AM   #15 (permalink)
Sniper
 
hoov7888's Avatar
 
Join Date: Apr 2011
Location: southern California

CCM Fan
wd40+impact?


So we all agree that 2k front blocks fit on ss-25 for a mech conversion, correct?


anyone who has already done this have a picture?
hoov7888 is offline   Reply With Quote
Old 10-02-2012, 09:17 AM   #16 (permalink)
Total wreath
 
Join Date: Feb 2009
Location: Las Vegas

CCM Fan
Yes 2k

I don't need to take of my vasa unless it's broke. And guess what. Haven't needed to in 3 years. Hopefully never will. It'll have to be drilled out cuz imthinkmthe Allen key hole is rounded
shredxcam is offline   Reply With Quote
Old 10-02-2012, 11:21 AM   #17 (permalink)
.67cal Buwwets!
 
crazyorigin's Avatar
 
Join Date: Mar 2008
Location: Central Southern Upstate NY

CCM Fan
Try to use a Dremel and a cutting wheel and cut s slot in the bolt and use a flathead screwdriver to remove it. That or i have found driving a larger Torx bit into a stripped allen key can remove then but will usually ruin your Torx bit.
crazyorigin is offline   Reply With Quote
Old 10-02-2012, 07:41 PM   #18 (permalink)
Total wreath
 
Join Date: Feb 2009
Location: Las Vegas

CCM Fan
I don't plan on removing it unless I absolutely have to

I'm one of those people who never take their gun apart unless is broke

Maintenance i think is over done in the paintball world
shredxcam is offline   Reply With Quote
Old 10-04-2012, 01:54 AM   #19 (permalink)
Seasoned Member
 
Christacular's Avatar
 
Join Date: Sep 2010
Location: Los Angeles, CA

i thought the v-asa was too thick for a 3-way arm, since there is no hole for the actuating arm to pass through
Christacular is offline   Reply With Quote
Old 10-04-2012, 02:07 AM   #20 (permalink)
MCB Member
 
Themole's Avatar
 
Join Date: Jul 2010
Location: Sunny Cali

I converted my SS for the autocockers vs automags event:





Essentially everything bolts on just fine. Standard length pump arm/actuating rod and its a 2k+ banjo. The only weird thing was the banjo bolt needed to be cut down a few threads. The 2k5 FB will NOT fit. I tried, there will be a gap between the FB and the vert asa.
__________________
Feedback
Themole is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 12:23 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC