mcarterbrown.com  

CCM Chipley Machine

Closed Thread
 
Thread Tools Search this Thread
Old 10-14-2012, 05:06 PM   #1 (permalink)
Stock Class Aficionado
 
idkfa's Avatar
 
Join Date: Mar 2007
Location: Vancouver, BC, Canada

CCM Fan
CCM Regulator - Higher Pressure?

This is probably a "no", but is there any way to increase the output pressure on a CCM reg to 800 psi or so? I would like to use one on an unmodified Phantom.
__________________

Last edited by idkfa; 10-16-2012 at 06:11 PM.
idkfa is offline  
Old 10-14-2012, 09:53 PM   #2 (permalink)
Red
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
IN short. No.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline  
Old 10-15-2012, 10:03 AM   #3 (permalink)
Newbie++
 
noclue119's Avatar
 
Join Date: Apr 2009
Location: Atlanta, GA

CCM Fan
Quote:
Originally Posted by idkfa View Post
This is probably a "no", but is there any way to increase the output pressure on a CCM reg to 800 psi or so? I would like to use one on an unmodified Phantom.
If you have a 800 psi output tank you can get 800 psi input by hooking the tank directly up the phantom. You don't need a CCM reg.
__________________
For Sale: Tactical G6R with Full Auto

"Originally posted by Element Paintball@pbnation: you realize it would be easier to get a new wife than a new dc2."



My MCB Feedback
noclue119 is offline  
Old 10-15-2012, 10:18 AM   #4 (permalink)
Red
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Truth - I used to run a gas through grip on my Phantom with a Crossfire HP reg. No issues.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline  
Old 10-15-2012, 10:21 AM   #5 (permalink)
Stock Class Aficionado
 
idkfa's Avatar
 
Join Date: Mar 2007
Location: Vancouver, BC, Canada

CCM Fan
Sorry, I was being general. I want a high pressure regulator on my Phantom, not specifically one with 800 psi output. I was hoping to standardize my regulators, I will continue using my AA Vigilante.

Thanks!
__________________

Last edited by idkfa; 10-15-2012 at 10:25 AM.
idkfa is offline  
Old 10-16-2012, 04:05 PM   #6 (permalink)
Yield and Overcome...
 
Dr. PhunkyPants's Avatar
 
Join Date: Apr 2008

CCM Fan
If you do a search on regulated phantoms, you will find an overwhelming preponderance of those who would say it creates either no change or worsens performance.

The reason is this...phantoms tend to work best at or around 800 or 850psi. Regulated HPA is coming out of the tank at this level...at most. The only reg you are going to find that does a good job at that high pressure level is a Palmers Stabilizer. The Stab will--at minimum--knock 100psi or so off your input pressure....so now you're at 600-700psi.

Bottomline, a 20oz CO2 tank is a lot better way to get great performance out of your phantom than messing with regs! YMMV
Dr. PhunkyPants is offline  
Old 10-16-2012, 06:05 PM   #7 (permalink)
Stock Class Aficionado
 
idkfa's Avatar
 
Join Date: Mar 2007
Location: Vancouver, BC, Canada

CCM Fan
I do appreciate the reply but I know how to regulate a Phantom and I have regulated them successfully in the past at a number of pressure set points. I was asking about CCM regulators, which is why I asked this here instead of the CCI subforum. I listed 800 psi as an arbitrary higher number, not an absolute.

I wanted higher pressure out of a CCM regulator. This is not possible. Thank you.
__________________
idkfa is offline  
Closed Thread

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 06:48 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC